We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SDS Plus drill bit 5/16 inch by 12 inches chrome vanadium finish

ARTU USA INC

ARTU USA INC 01236 SDS Plus Drill Bit 5/16" x 12" pneumatic accessory

SKU CH-RYCM-3X28Z

SDS Plus drill bit drills 10 in deep in masonry with a 5/16 in diameter and 12 in overall length

  • SDS Plus shank fits rotary hammers directly
  • 5/16 inch diameter drills precise holes in masonry
  • 12 inch overall length reaches deep work areas
  • 10 inch maximum drilling depth handles thick materials
  • Chrome vanadium steel resists wear during heavy use

Drill Bit for SDS Plus Rotary Hammers

This SDS Plus drill bit fits rotary hammers that accept the SDS Plus shank system. It is manufactured from chromium-vanadium steel for hardness and wear resistance. The overall length is 12 in, giving a maximum drilling depth of 10 in. The shank diameter measures 9/32 in and the cutting diameter is 5/16 in.

Suited for Concrete and Masonry Drilling

The bit handles anchor installation, through-bolting and hole drilling in concrete, brick and stone. It is not designed for wood, metal or tile work where a different flute geometry is required. Buyers who need a larger cutting diameter or a longer reach should look at other sizes. The shank will not fit SDS Max or spline-drive machines.

Capacity and Headroom in Concrete

The 10 in usable depth covers most residential anchor and rebar holes in a single pass. In very hard aggregate or reinforced concrete the flutes can load up, reducing penetration speed and requiring frequent withdrawal. The 5/16 in diameter limits the maximum anchor size to fixings designed for that hole. For deeper or wider holes a longer or larger bit is necessary.

How it compares

Measured against everything we stock in Bits, Hole Saws & Accessory Kits, at today’s prices. Recalculated every night.

Price $12.99
Cheaper than about 82% of the 5,493 comparable items (median $27.99).

Specifications

Product
Brand nameARTU

Questions about this item

What type of hammer drill chuck is required for the SDS Plus shank on this bit?

The bit uses an SDS Plus shank with a 9/32 in diameter, so it needs an SDS Plus compatible rotary hammer drill chuck to lock in securely.

Can this 12 in overall length bit reach the full 10 in maximum drilling depth in a single pass?

Yes, the 12 in overall length provides enough clearance to achieve the 10 in maximum drilling depth without the chuck hitting the work surface.

How can I confirm the bit is cutting efficiently after I start drilling?

Steady, even spiral dust ejection from the flutes and consistent motor sound indicate the CrV tip is cutting cleanly at the rated depth.

More in Bits, Hole Saws & Accessory Kits

Similar items