We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ashcroft CX8MB2425IWL pressure transducer, plastic housing with brass hose barb fitting, screw terminals

Ashcroft

Ashcroft CX8MB2425IWL Pressure Transducer -5 to 5 In WC

SKU CH-EYK3-GQDMJ

Measures differential pressure from -5 to 5 in WC with 4-20mA output and ±0.80% accuracy

  • Product typeElectronic
  • ±0.80 % full-scale accuracy for reliable low-pressure readings
  • 4–20 mA two-wire loop output simplifies control wiring
  • 12–36 V DC supply range fits standard industrial power
  • NEMA 1 enclosure with UL94-5VA rating meets basic safety needs
  • Brass hose-barb fitting and plastic housing suit clean-air applications

Ashcroft CX8MB2425IWL differential transmitter

This Ashcroft CX8MB2425IWL differential transmitter measures pressure from -5 to 5 inches of water column with an accuracy of ±0.80% of full scale. It outputs a 4 to 20 mA DC signal over a two-wire loop powered by 12 to 36 V DC. The CXLdp series unit is built for test and measurement tasks that require a reliable low-pressure sensor.

Sustained-load behaviour and overpressure margin

The transmitter withstands a continuous overpressure of 15 psid and a burst pressure of 25 psid, giving headroom above the 5 in wc upper range. Its ±0.80% full-scale accuracy holds across the operating span while the 12 to 36 V DC supply range tolerates voltage droop on long cable runs. The two-wire current loop rejects electrical noise better than voltage outputs in industrial environments.

Brass hose barb and NEMA 1 enclosure

A 1/4-inch male hose barb in brass connects directly to flexible tubing without extra adapters. The plastic housing carries a NEMA 1 rating for indoor use and meets UL94-5VA flammability requirements. Screw terminals accept stripped wires for secure field wiring, and the compact form factor fits tight panels where larger transmitters cannot be mounted.

How it compares

Measured against everything we stock in Meters, Testers & Measuring Tools, at today’s prices. Recalculated every night.

Price $130.99
Pricier than about 70% of the 3,030 comparable items (median $54.99).

Specifications

Product
Brand nameASHCROFT
Product typeElectronic

Questions about this item

How much heat or noise does the CX8MB2425IWL generate when powered continuously at 36V DC?

The transducer draws a 4 to 20mA loop current, so power dissipation stays very low and the plastic housing produces no audible noise during all-day operation.

What power supply and wiring must I already have to install this 2-wire transmitter?

You need a 12 to 36V DC source and a current-loop input that accepts 4 to 20mA; the unit connects via screw terminals with no additional conduit or barrier required.

Will the 1/4 in hose-barb fitting and NEMA 1 rating work with my existing brass manifold and indoor panel?

Yes, the male 1/4 in hose barb threads into standard brass ports, and the NEMA 1 enclosure is designed for clean, dry indoor cabinets alongside legacy instruments.

More in Meters, Testers & Measuring Tools

Similar items