MSI 939-S336-002 1U barebone server AM5 B650 4 DDR5 2×10G 2×2.5" 450W redundant
- Single AMD Ryzen 70…
- 1U
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
1U rackmount barebone supporting one SP5 EPYC 9004 CPU, 8 DDR5 DIMM slots, 4 NVMe and 8 SATA bays, dual 10GbE, plus PCIe5.0 x16 and M.2
The ASRock Rack 1U8S4E-GENOA/2T is a 1U rackmount barebone designed for storage-intensive workloads. It targets system integrators and IT teams building custom AMD EPYC 9004 series platforms with high drive density. The chassis supports a single Socket SP5 processor up to 300 W and includes a redundant 750 W 80-PLUS Platinum power supply. No CPU or memory is installed.
Twelve front bays accept 2.5-inch drives through a passive NVMe/SATA/SAS backplane; four bays are wired for PCIe 5.0 x4 NVMe and eight for SATA. SAS drives require an additional RAID or HBA card with cabling. Two internal M.2 M-key slots support PCIe 4.0 x4 lengths from 2230 to 2280. A single full-height half-length PCIe 5.0 x16 slot is available via riser for expansion cards up to 75 W.
Dual Intel X550-AT2 controllers provide two RJ45 ports at 10 Gigabit speeds for continuous network traffic. The redundant platinum power supply maintains delivery during extended operation. Eight DDR5 RDIMM slots support up to 512 GB per 3DS module for large memory footprints. Cooling is sized for the 300 W CPU envelope under constant load.
Measured against everything we stock in Barebone Servers & DIY Kits, at today’s prices. Recalculated every night.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | ASRock Rack |
| Model name | 1U8S4E-GENOA/2T |
| Target workload | General Purpose Server |
| Processor | |
| Processor | Supports AMD EPYC 9004 (with AMD 3D V-Cache Technology) and 97 × 4 series processors |
| Processor socket | Socket SP5 |
| Preinstalled processor | No CPU Installed |
| Max supported CPUs | 1 |
| Processor details | Up to 300 W |
| Memory | |
| Installed RAM | No Memory Installed |
| RAM slots | 8 × 288Pin |
| Maximum supported memory | Max. Capacity per DIMM - RDIMM:96 GB (2R) - RDIMM-3DS: 512 GB (2S8Rx4) |
| Supported memory | Supports DDR5 288-pin RDIMM, RDIMM-3DS |
| Storage | |
| Preinstalled storage | No Storage Installed |
| SATA ports | 12-port NVMe/SATA/SAS* passive backplane *SAS drive is only supported with additional RAID/HBA cards and SAS cable |
| M.2 slots | 2 x M-key (PCIe5.0 x4); support 2280/2260/2242/2230 form factor |
| Hot-swap drive bays | 4 x hot-swap 2.5 in NVMe (PCIe4.0 x4) drive bays 8 x hot-swap 2.5 in SATA drive bays |
| Connectivity | |
| Primary LAN controller | Intel X550-AT2 |
| Second LAN | Intel X550-AT2 |
| Top LAN speed | 10 Gigabit |
| Ports & slots | |
| PCIe slots | Rear: 1 FHHL PCIe5.0 x16 via RB1UX16R_G5 (Up to 75 W) (SLOT7 close to CPU) |
| Front USB ports | 1 x USB 3.2 Gen1 Type-A |
| VGA ports | 1 x DB15 (VGA) |
| Rear USB ports | 2 x USB3.2 Gen1 Type-A |
| Ethernet port | 2 x RJ45 (10GbE) 1 dedicated IPMI |
| Power | |
| Power supply | 1+1 Slim PSU, 750 W, 80-PLUS Platinum, 100-240 V, 50/60 Hz |
| Size & build | |
| Form factor | 1U Rackmount |
| Product dimensions | 1.7 in × 26.6 in × 17.2 in |
| Shipping weight | 20.40 kg |
| Package size | 940 × 615 × 215 mm |
| Environment & compliance | |
| Temperature range | Operation temperature: 10 °C to 35 °C / Non operation temperature: -40 °C to 70 °C |
| Humidity range | Non operation humidity: 20% ~ 90% ( Non condensing) |
Check the RJ45 link LEDs on the rear panel; each port shows activity when a 10 Gigabit link is established.
The barebone includes the 1U chassis, 750W 80-PLUS Platinum 1+1 PSU, 12-port NVMe/SATA/SAS passive backplane, and M.2 riser; you must buy an AMD EPYC 9004 series CPU, DDR5 RDIMM or RDIMM-3DS modules, and 2.5" NVMe or SATA drives.
Select any supported EPYC 9004 SKU up to 300W TDP such as the 9654P, 9474F, 9374F, or 9184X depending on core count and frequency needs.
More in Barebone Servers & DIY Kits
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?