ASUS TUF-RTX4060TI-8G-GAMING graphics card

Refurbished TUF Gaming RTX 4060 Ti 8GB for 1440p

This refurbished ASUS TUF Gaming GeForce RTX 4060 Ti targets 1440p gaming rigs that need a balance of frame rate and ray tracing headroom. The Ada Lovelace GPU delivers 4352 CUDA cores with a boost clock of 2565 MHz, while 8GB of GDDR6 on a 128-bit bus feeds texture data at 18 Gbps. Three DisplayPort 1.4a outputs and one HDMI 2.1a port drive up to four displays at 7680 x 4320 resolution. A single 8-pin connector draws power within a 160W TDP envelope backed by a 650W PSU recommendation.

Sustained load behaviour with Axial-tech cooling

Under continuous load the triple-fan cooler moves 21 percent more airflow than the prior Axial-tech design, and dual ball bearings extend bearing life. Military-grade capacitors rated for 20K hours at 105C stabilise the power rail during long sessions. The vented metal exoskeleton adds rigidity and opens extra exhaust paths, helping the card hold its 2565 MHz boost without throttling. Auto-Extreme automated assembly reduces solder variability, so thermal performance stays consistent across months of heavy use.

ATX fitment at 300 mm length and 3.12-slot width

The card measures 300 mm long and occupies 3.12 slots, so verify case clearance and motherboard spacing before ordering. A standard ATX bracket aligns with typical chassis cut-outs, and the single 8-pin power socket sits on the rear edge for straightforward cable routing. Installers sometimes forget to remove the protective foam wedge between the fans and heatsink, which causes immediate overheating. Ensure the PCIe 4.0 x8 slot is fully seated and that the PSU delivers the recommended 650W to avoid instability under load.