We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Atermiter AT-X99 motherboard with Xeon E5-2670 V3 and 32 GB DDR4 REG ECC RAM installed

Atermiter

Atermiter AT-X99 embedded solution with Xeon E5-2670 V3 and 32 GB DDR4 REG ECC

SKU CH-YW4W-0R2W1 MPN AT-X99

Embedded X99 motherboard kit with Xeon E5-2670 V3 and 32 GB DDR4 REG ECC memory

  • ProcessorIntel Core 5th gen (LGA 2011-v3)
  • CPU socketLGA 2011-v3

Model X99-2670V3-32GB 3200Mhz(16GB x 2pcs ECC)

  • Pre-configured Xeon E5-2670 V3 with 32 GB REG ECC
  • 32 GB DDR4 3200 MHz memory runs at CPU-limited 2133 MHz
  • Embedded X99 board fits 235 × 185 mm footprint
  • Four DDR4 slots allow ECC-only or UDIMM-only populations
  • 24-pin plus 8-pin power inputs for stable delivery

Ready-to-run Xeon workstation base

The Atermiter AT-X99 bundle pairs an Intel Xeon E5-2670 V3 with 32 GB of DDR4 REG ECC memory on an LGA 2011-v3 board. It arrives assembled and tested so system integrators and lab builders can deploy a validated compute node without sourcing separate components. The combination targets workloads that benefit from registered ECC stability such as rendering farms, simulation clusters or virtualization hosts.

Sustained-load behaviour with registered ECC

Under continuous load the Xeon E5-2670 V3 runs its cores at the processor's rated frequencies while the memory controller limits the 3200 MHz modules to 2133 MHz. The registered ECC design detects and corrects single-bit errors in real time, preventing silent data corruption during multi-day compute jobs. Thermal output remains consistent because the chipset and voltage regulation are sized for the supported 2011-v3 series rather than burst-only operation.

Upgrade path from consumer or mixed-memory builds

This kit replaces a consumer desktop platform that cannot accept registered ECC modules or a mixed-memory configuration the board forbids. The jump is worth it when the workload demands error-correcting memory across all four slots and a validated Xeon rather than a desktop CPU on a workstation chipset. Builders who need non-ECC UDIMM populations or a different chipset feature set should look elsewhere.

How it compares

Measured against everything we stock in Embedded & Replacement Boards, at today’s prices. Recalculated every night.

Price $285.99
Pricier than about 73% of the 117 comparable items (median $72.99).

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Specifications

Processor
ProcessorIntel Core 5th gen (LGA 2011-v3)
CPU socketLGA 2011-v3

Other versions of this model

3 more in the same range

Questions about this item

How much heat and noise should I expect from the Xeon E5-2670 V3 running continuously on this board?

The board uses a 24-pin plus 8-pin power connection to feed the CPU and memory; sustained load will draw substantial current, so a chassis with good airflow and a cooler rated for high-wattage LGA 2011-v3 processors is essential.

What other parts do I need to have on hand before this embedded solution will boot?

You must supply a graphics card for the PCI-E x16 slot, storage drives, a case that fits the 235 mm by 185 mm board, and a PSU with both 24-pin and 8-pin CPU connectors.

Will my existing DDR4 UDIMM sticks work alongside the supplied 32 GB REG ECC kit?

The board cannot mix ECC and non-ECC modules; all four slots must use the same type, so you would need to replace any UDIMM sticks with REG ECC memory.

More in Embedded & Replacement Boards

Similar items