AUTYUE PQ057 USB A to USB C cable 1M 10Gbps 60W 2 pack

Two-metre braided pair for power and data

This two-pack supplies two one-metre USB A to USB C cables built with oxygen-free copper conductors and a nylon braid. Each cable carries a 56 kΩ pull-up resistor and an E-Marker chip to enable safe 60 W charging at 20 V and 3 A. The aluminium alloy shells and reinforced strain relief are rated for over twenty thousand ninety-degree bend cycles. They suit phones, tablets, laptops and portable SSDs that charge and transfer over a single USB-C port.

Sustained 10 Gbps throughput without throttling

The USB 3.2 Gen 2 interface maintains the full ten gigabit per second data rate during long transfers such as full-season video libraries or large project folders. The 22 AWG copper cores and integrated E-Marker keep the link stable at 1000 MB/s without dropping to lower speeds. Simultaneous charging at up to three amps continues while data moves, so a connected drive or phone stays powered throughout the session.

Low heat and quiet operation under load

The oxygen-free copper and 56 kΩ resistor limit resistive loss, so the cable body remains cool to the touch even during continuous 60 W delivery. No active cooling or moving parts are present, making the cables completely silent. The nylon braid resists abrasion and prevents tangling, while the zinc alloy connectors withstand repeated insertion without loosening or generating excess warmth.