We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black ABS clamp headphone stands with 360° rotating arms and cable clips

Avid 200077838 Clamp Headphone Stand (2-pack)

SKU CH-RWTE-XKAAB

Two clamp-on stands hold two headsets each, rotate 360°, include cable clips, and fit desks 9-42 mm thick

  • Materials usedAcrylonitrile Butadiene Styrene
  • Measurements14.33 in W × 12.83 in H × 9.06 in D
  • Surface finishBlack
  • Overall length18 ft (5.49 m)
  • Product weight0.66 lb (0.3 kg)
  • Two stands install in 10 seconds with spring clamp
  • 360° rotating arms swing under desk to save space
  • Built-in cable clips keep cords tidy and organized
  • Curved edges with rubber pads protect headphones from scratches
  • Each arm holds 2.2 lbs for a total of 4.4 lbs

Two-Pack Clamp Stand for Desk-Mounted Audio

The Avid 200077838 ships as a pair of black ABS stands that clamp to desks 9 to 42 mm thick without tools or adhesive. Each unit installs in roughly 10 seconds and holds two headsets or VR glasses on independent arms. Spring tension keeps the assembly secure while leaving the desktop surface unmarked.

360° Rotating Arms Manage Sustained Desk Clutter

Both arms rotate a full 360 degrees, letting you swing headsets under the desk when not in use and pull them back instantly during long sessions. Integrated cable clips route cords along the arm so wires do not tangle or pull on connectors over time. The curved edges and rubber pads protect headband finishes from pressure marks during daily on-and-off cycles.

Load Limit and Clamp Range Define Practical Use

Each arm supports up to 2.2 lb for a combined 4.4 lb per stand, so heavier audiophile cans or bulky VR rigs may exceed the rated capacity. The clamp only fits tops between 9 mm and 42 mm thick, ruling out very thin glass surfaces or thick butcher-block tops. No screw holes or adhesive pads are provided for alternative mounting.

How it compares

Measured against everything we stock in Audio Stands, Racks & Boom Arms, at today’s prices. Recalculated every night.

Price $21.99
Cheaper than about 67% of the 791 comparable items (median $32.99).

Specifications

Product
Brand nameAvid
Model nameClamp Headphone Stand for Desk
Part number200077838
Size & build
Surface finishBlack
Materials usedAcrylonitrile Butadiene Styrene
Overall length18 ft (5.49 m)
Measurements14.33 in W × 12.83 in H × 9.06 in D
Product weight0.66 lb (0.3 kg)

Questions about this item

Does the clamp headphone stand make any noise or generate heat during all-day use?

The Avid 200077838 clamp headphone stand is a passive accessory with no moving parts or electronics, so it produces no noise, heat, or power draw while holding headsets.

What desk thickness does the Avid 200077838 clamp require to work properly?

The spring clamp fits desks between 9 mm and 42 mm thick, covering most home, office, and gaming desks without glue or drilling.

Will the 360° rotating arms on this stand clear older headsets with wide headbands?

Each arm rotates a full 360° and supports up to 2.2 lbs, so bulky vintage headbands can be swung underneath the 14.33 in wide stand when not in use.

More in Audio Stands, Racks & Boom Arms

Similar items