We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black microphone stand with 14in gooseneck and weighted round base

Avid RG250 Microphone Stand 32-70in 14in Gooseneck 4.5lb Base Black

SKU CH-TY2B-4PZBT

A floor stand with a 14-inch flexible gooseneck and 4.5 lb weighted base adjusts from 32 to 70 inches for seated or standing use

  • Spec summaryAdjustable Gooseneck Round Base Floor Stands, Weighted Round
  • Measurements14.33 in W × 12.83 in H × 9.06 in D
  • Surface finishBlack
  • Overall length18 ft (5.49 m)
  • HighlightsAdjustable Gooseneck Round Base Floor Stands
  • Product weight6.62 lb (3 kg)
  • Height adjustable from 32 to 70 inches for sitting or standing use
  • 14 inch flexible gooseneck rotates 360 degrees for precise microphone positioning
  • Weighted 4.5 lb round base with 9.8 inch diameter and non-slip pads for stability
  • Detaches into four parts for quick transport and setup at gigs or studio
  • Includes mic clip with 180 degree rotation for versatile mounting options

Avid RG250 Adjustable Gooseneck Stand

The Avid RG250 is a black floor-standing microphone stand built for vocalists, podcasters and instrumentalists who need a stable, height-adjustable platform. Its weighted round base and single-clutch column keep the microphone steady whether the performer is seated or standing. The 14-inch gooseneck and rotating clip allow precise positioning for any source.

Thermals Noise and Power Draw

As a passive mechanical stand the RG250 generates no heat, consumes no electricity and adds no fan noise to the recording environment. The 4.5 lb base and six non-slip pads anchor the stand firmly on stage or studio floors. The upgraded fixing loop between base and boom eliminates wobble during energetic performances.

Replaces Tripod Stands for Fixed Locations

This stand replaces lightweight tripod models when stability matters more than minimum footprint. The 9.8-inch diameter base and 6.62 lb total weight suit permanent studio installations, concert stages and road-show rigs where a tipped stand would interrupt a take. It is not for buyers who need an ultra-compact desktop arm or a boom that reaches far beyond the base diameter.

How it compares

Measured against everything we stock in Audio Stands, Racks & Boom Arms, at today’s prices. Recalculated every night.

Price $46.99
Pricier than about 71% of the 791 comparable items (median $32.99).

Specifications

Product
Brand nameAvid
Model nameRG250
Part numberRG250
Size & build
Surface finishBlack
Overall length18 ft (5.49 m)
Measurements14.33 in W × 12.83 in H × 9.06 in D
Product weight6.62 lb (3 kg)

Questions about this item

How do I assemble the Avid RG250 from its four parts and which connection do people overtighten?

Screw the extension pole into the weighted base using the long screw adapter, attach the single height clutch, then fit the 14-inch gooseneck; the base-to-pole joint is the one users often over-tighten, risking thread damage.

What part of the RG250 is most likely to wear out first and need replacement?

The 360° flexible gooseneck and its 180° rotating mic clip endure repeated bending and twisting, so the internal spring steel or the clip’s pivot screw are the components that typically require replacement after heavy use.

At what load does the 4.5 lb base start to tip during a long session?

The 9.8-inch diameter base with six non-slip pads and the upgraded fixing loop is designed for standard broadcast microphones; exceeding the stand’s rated capacity or placing it on an uneven floor will cause instability before the base itself fails.

More in Audio Stands, Racks & Boom Arms

Similar items