Axiom EM4D-AX 2 x 32 GB DDR3 1066 ECC Registered server RAM
64 GB DDR3 ECC registered kit, two 32 GB modules at 1066 MHz CL9 and 1.35 V
- Total capacity2 × 32 GB
- Rated speedDDR3 1066 (PC3 8500)
- CAS latencyCL9
- Rated voltage1.35 V
- Buffer typeRegistered
- Product type240-Pin DDR3 SDRAM
- 64 GB total capacity from two 32 GB modules
- ECC Registered design detects and corrects memory errors
- DDR3 1066 speed rated at PC3 8500 bandwidth
- Low 1.35 V operation reduces power draw
- CAS latency CL9 for responsive access timing
64 GB DDR3-1066 registered kit
This kit provides 64 GB of DDR3-1066 memory using two 32 GB registered DIMMs. It is built for servers that require ECC error correction and registered signal processing. The modules run at 1.35 V with a CAS latency of CL9. They use the standard 240-pin form factor.
Suited for DDR3 servers needing ECC registered DIMMs
Systems that accept DDR3 registered ECC modules at 1066 MHz can use this kit. It will not work in platforms that require unbuffered non-ECC memory or a different DDR generation. Builders needing higher frequencies or lower voltages should look elsewhere.
1066 MHz DDR3 speed (PC3-8500)
The memory operates at 1066 MHz, rated as PC3-8500. This speed determines whether the modules match the server's memory bus. Verify the platform supports DDR3-1066 registered ECC before purchase.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $499.99
- Pricier than about 71% of the 6,523 comparable items (median $188.99).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Axiom |
| Model name | EM4D-AX |
| Total capacity | 2 × 32 GB |
| Product type | 240-Pin DDR3 SDRAM |
| Performance | |
| Rated speed | DDR3 1066 (PC3 8500) |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Registered |
| Power | |
| Rated voltage | 1.35 V |
| Size & build | |
| Shipping weight | 0.09 kg |
| Package size | 152 × 76 × 25 mm |
Questions about this item
Does my server need 240-pin DDR3 slots and support for 1.35 V registered ECC DIMMs to use this kit?
Yes, each module is a 240-pin DDR3 DIMM rated at 1.35 V with ECC and registered signal processing, so the motherboard must provide DDR3 slots that accept registered ECC memory at that voltage.
Can I run these 1066 MHz CL9 modules in a system that currently uses slower DDR3 memory?
The kit operates at DDR3-1066 with CL9 timing; the memory controller will set a common speed for all installed DIMMs, so older slower modules will limit the kit to the lowest shared frequency.
How can I confirm the full 64 GB is recognised and ECC is active after installation?
Check the BIOS or UEFI memory information screen for 64 GB total capacity and ECC status enabled, then verify in the operating system with tools such as dmidecode or CPU-Z that show ECC correction active.
More in ECC Server RAM
Similar items
Kingston Technology Corp. KTL-TS432E/32G 32GB DDR4 3200 CL22 ECC Unbuffered server RAM
- 32 GB
- DDR4 3200
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
Crucial MTC20F2085S1RC48BR 32GB DDR5 4800 CL40 2Rx8 ECC Registered server RAM
- 32 MB
- DDR5 4800
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
Crucial MTC20F208XS1RC56BB1R 48GB DDR5 5600 CL46 registered server RAM
- 48 GB
- DDR5 5600





