Axiom T9V42AA-AX server RAM 64 GB DDR4 2400 MHz CL17 LRDIMM 288-pin ECC 1.2 V
64 GB DDR4 LRDIMM module with ECC, CL17 latency and 1.2 V operation for compatible HP Z840 workstations
- 64 GB capacity supports large virtualised workloads
- 2400 MHz DDR4 speed delivers high data throughput
- CL17 latency ensures responsive memory access
- ECC protection detects and corrects data errors
- Load-reduced 288-pin DIMM lowers electrical load on server bus
64 GB DDR4 LRDIMM for HP Z840 Workstations
This 64 GB DDR4 load-reduced DIMM operates at 2400 MHz with CL17 latency and 1.2 V power draw. It is built for HP Compaq Workstation Z840 systems that require ECC registered memory. The 288-pin module follows the PC4-19200 standard for server-grade reliability.
288-pin LRDIMM form factor with RoHS compliance
The load-reduced design lowers electrical load on the memory bus, allowing higher capacity per channel in supported workstations. A 288-pin DIMM layout fits standard DDR4 server slots without adapters. RoHS certification confirms the assembly meets restricted-substance requirements for environmentally friendly deployment.
DDR4-2400 bandwidth ceiling
The DDR4-2400 interface caps throughput at the PC4-19200 rate, so workloads needing higher memory bandwidth will not benefit from faster clocks on this module. ECC error correction adds latency overhead compared to non-ECC alternatives. Builders needing more than 64 GB per slot must look to higher-density LRDIMM or 3DS parts not covered here.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $462.99
- Pricier than about 69% of the 6,523 comparable items (median $188.99).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Size & build | |
|---|---|
| Shipping weight | 0.45 kg |
| Package size | 25 × 25 × 25 mm |
Questions about this item
What bandwidth does the DDR4-2400 standard provide for this module?
The DDR4-2400 standard is rated at PC4-19200, which specifies the peak transfer rate for this memory module.
What slot type and pin count does this 288-pin LRDIMM require on the motherboard?
This module uses a 288-pin DIMM form factor and requires a standard DDR4 DIMM slot that supports load-reduced memory.
How is the module installed and what alignment step is often missed?
Align the notch on the module's gold edge connector with the key in the DDR4 DIMM slot, then press down firmly until the retaining clips on both ends click into place to secure the module.
More in ECC Server RAM
Similar items
Kingston Technology Corp. KTL-TS548D8-32G 32GB DDR5 4800 CL40 ECC Registered server RAM
- 32 GB
- DDR5 4800
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
Kingston Technology Corp. KCS-UC432/64G 64GB DDR4 3200MHz CL22 ECC Registered 288-pin DIMM server RAM
- 64 GB
- DDR4 3200
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
Brute Networks Dell Compatible 32GB DDR4-3200 2Rx8 ECC Registered RDIMM server RAM
- 32 GB
- 1.2 V





