MTX MB210SP Dual 10" Car Subwoofer Enclosure with Amp
- 10 in (25.4 cm)
- Textured black poly…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
An 18-inch car subwoofer with a 4.5-inch voice coil and 8-ohm impedance
The B&C 18SW115-8 is an 18-inch car subwoofer built around a 4.5-inch voice coil and an 8-ohm impedance. It uses a neodymium magnet structure to deliver low-frequency output in automotive installations. The driver suits enthusiasts who want deep bass from a single large cone.
An 8-ohm nominal impedance determines how much current the amplifier must supply for a given voltage. Wiring multiple units in parallel lowers the total load, while series wiring raises it; the installer must ensure the amplifier remains stable at the resulting impedance. Mismatched loads can trigger protection circuits or reduce output.
The 4.5-inch voice coil is the specification that decides whether this driver fits the system's thermal and power requirements. A larger coil dissipates more heat during extended high-output passages, letting the subwoofer sustain higher SPL without compression. Buyers who need a smaller coil for lighter enclosures or lower power should choose a different model.
Measured against everything we stock in Car Subwoofers & Enclosures, at today’s prices. Recalculated every night.
No published specifications for this item yet.
The 18SW115-8 is a single 18-inch driver with a 4.5-inch voice coil and 8-ohm impedance; choose it when your box design calls for that exact coil size and load.
At 1 watt and 1 metre the driver produces 115 dB, so in a typical car cabin it will play loudly with modest amplifier power, though actual output depends on enclosure tuning and cabin gain.
An 8-ohm load draws less current than lower-impedance woofers, so you need an amplifier that can deliver its rated power at 8 ohms or bridge channels to reach the desired output level.
More in Car Subwoofers & Enclosures
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?