We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanised steel wire rope, 1/16 in diameter, 500 ft coil

B-LINE

B-LINE BKW063 Wire Rope Coupling 1/16 in 500 ft

SKU CH-XSK6-T66AG

Galvanised steel wire rope with a 1/16 in diameter, 96 lb working load limit and 500 ft length, cULus listed for lifting applications

  • Galvanized steel resists corrosion for long outdoor life
  • 96 lb working load limit handles light lifting safely
  • 7 x 7 strand construction stays flexible under tension
  • 1/16 in diameter fits compact rigging setups
  • 500 ft continuous length reduces splice points

Wire Rope Coupling 1/16 in

This galvanized steel wire rope coupling provides a 500 ft length of 1/16 in diameter cable. It is designed for lifting applications with a working load limit of 96 lb. The 7 x 7 strand construction offers flexibility for rigging and tensioning tasks.

Upgrade from thinner or uncoated lines

Replacing lighter cords or ungalvanized rope with this cULus listed coupling increases corrosion resistance and rated capacity. The jump is worth it when a project demands a verified 96 lb working load limit and 500 ft continuous supply.

Fits winches pulleys and tension systems

The 1/16 in diameter suits small sheaves and compact hardware. Its uncoated galvanized finish allows direct attachment to clips and thimbles without stripping. The 500 ft spool reduces splice points in long runs.

How it compares

Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.

Price $109.99
Pricier than about 90% of the 2,955 comparable items (median $17.99).

Specifications

Product
Brand nameEATON B-LINE

Questions about this item

What diameter hole or fitting is required for the 1/16 in cable?

The cable measures 1/16 in overall diameter, so any ferrule, thimble or pulley groove must accept that size.

How do you terminate the 7 x 7 galvanised steel rope, and what step is often missed?

Swage or crimp an aluminium or copper sleeve over the 7 x 7 strands, then proof-load the joint; skipping the proof-load is the common error.

When should the 500 ft coil be replaced based on the 96 lb working load limit?

Retire the rope if any strand shows corrosion, kinks or broken wires that reduce strength below the 96 lb working load limit.

More in Hose Fittings, Adapters & Clamps

Similar items