Baldwin Filters B7467 Oil Filter Spin-On 12 Micron
Spin-on oil filter rated at 12 microns with bypass and anti-drainback valves
- Product colorTransparent
- 12 micron rating captures fine contaminants
- Spin-on design enables quick tool-free replacement
- 8 psid bypass valve maintains flow under pressure
- Anti-drainback valve prevents dry starts
- Attached gasket and standpipe simplify installation
Baldwin B7467 spin-on oil filter
The Baldwin B7467 is a spin-on oil filter rated at 12 micron filtration. It suits maintenance on J. C. Bamford equipment where a 3/4 In. -16 thread is required. The unit includes an attached gasket and standpipe for direct installation. Condition is new.
Sustained filtration with bypass protection
Under continuous flow the 8 psid bypass valve opens only when restriction exceeds the set point, maintaining oil supply during cold starts or heavy loading. The anti-drainback valve retains oil in the canister after shutdown, reducing dry-start wear on subsequent cycles. The 12 micron media captures fine particles through extended service intervals.
Sealed mounting for daily service
The spin-on design threads onto the 3/4 In. -16 boss with the integral gasket providing a leak-free seal without separate hardware. Transparent colour allows a quick visual check of the housing condition during routine inspections. The attached standpipe ensures correct internal alignment each time the filter is replaced.
How it compares
Measured against everything we stock in Heating & Cooling Controllers, at today’s prices. Recalculated every night.
- Price $13.99
- Cheaper than about 82% of the 1,762 comparable items (median $45.99).
Specifications
| Product | |
|---|---|
| Brand name | BALDWIN FILTERS |
| Product color | Transparent |
Questions about this item
Will the 12 micron rating restrict flow and raise oil pressure after hours of running?
The 12 micron media is designed to maintain normal flow while filtering finer particles; the built-in 8 psid bypass valve opens if the element ever becomes restrictive, protecting engine pressure.
Does the 3/4 In. -16 thread match the block on my J. C. Bamford machine without an adapter?
Yes, the filter threads directly onto the 3/4 In. -16 port used on J. C. Bamford equipment, so no adapter is required.
Can I keep using the same gasket surface on an older Bamford engine when I switch to this spin-on?
The attached gasket seals against the original mounting face, and the standpipe aligns with the existing oil gallery, so the older engine accepts it directly.
More in Heating & Cooling Controllers
Similar items
Baldwin Filters P162 HVAC control, transparent, 23 micron
- Transparent





