We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cylindrical silver fuel filter with attached hoses and clamps

Baldwin Filters

Baldwin Filters BF833-K2 Fuel Filter accessory

SKU CH-2S1X-9HBWV

In-line fuel filter kit includes hoses and clamps for direct installation

  • In-line design installs directly in the fuel line
  • 4-1/16 in height fits tight engine compartments
  • 1/4 in inlet and outlet match common fuel lines
  • Includes two hoses and four clamps for complete installation
  • Baldwin Filters brand trusted for filtration performance

Baldwin BF833-K2 fuel filter kit

The Baldwin BF833-K2 is an in-line fuel filter supplied with two hoses and four clamps for immediate installation. It suits automotive and light-commercial fuel systems that require a compact, serviceable filtration point. Mechanics and fleet operators can fit it without fabricating custom brackets or sourcing separate connectors.

Thermals noise and power draw

As a passive filtration component the filter generates no heat, noise or electrical load during operation. Fuel flows through the element under normal system pressure without adding restriction that would affect pump performance. There are no moving parts to wear or create vibration in the fuel line.

Build fit and clearance

The unit measures 4-1/16 inches in height and length with a 1-29/32 inch outside diameter, allowing placement in tight engine-bay corridors. Quarter-inch inlet and outlet ports accept the included hoses directly, eliminating the need for additional adapters. The package contains all hardware required for a complete in-line installation.

How it compares

Measured against everything we stock in Pumps, Sprayers & Pump Accessories, at today’s prices. Recalculated every night.

Price $4.99
Cheaper than about 96% of the 962 comparable items (median $38.99).

Specifications

Product
Brand nameBALDWIN FILTERS

Questions about this item

How do I install the BF833-K2 in-line fuel filter and which step is commonly missed?

Connect the 1/4 in inlet and outlet using the supplied hoses and four clamps, then tighten every clamp fully — the step often skipped is securing all four clamps after the hoses are pushed on.

What replacement schedule applies to the BF833-K2 filter element?

Replace the filter element at the vehicle manufacturer's recommended interval or whenever fuel flow drops noticeably; the included hoses and clamps should be inspected at the same time and swapped if cracked or corroded.

What is the first limitation that appears during extended operation of the BF833-K2?

The filter element gradually loads with contaminants, causing a progressive drop in fuel flow that becomes the primary restriction under sustained use.

More in Pumps, Sprayers & Pump Accessories

Similar items