We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 2-inch 90-degree hose barb trap with NPT threads

Banjo

Banjo HB200-90 2" 90° Hose Barb Trap

SKU CH-FAX5-AAMNK MPN HB200-90

A 2-inch 90-degree hose barb fitting with NPT threads, made from glass-reinforced polypropylene for chemical resistance and rated to 300 psi

  • Product typeDrain Components
  • Main materialHAWA
  • Product colorBlack
  • 90° elbow routes hose in tight spaces
  • 2" hose barb fits 2" ID hose directly
  • Glass-reinforced polypropylene resists chemicals and corrosion
  • Schedule 80 wall handles 300 psi working pressure
  • NPT male threads seal without extra adapters

2" 90° Hose Barb Fitting

The Banjo HB200-90 connects a 2-inch hose to a 2-inch male NPT thread at a 90-degree angle. It is built from glass-reinforced polypropylene for chemical resistance and strength. The Schedule 80 construction handles a maximum operating pressure of 300 psi. This fitting suits industrial and agricultural fluid-transfer systems.

Suits high-pressure chemical lines

Installers needing a durable, lightweight elbow for corrosive fluids will find this fitting appropriate. It is not for applications exceeding the 300 psi pressure rating. Buyers who require a straight barb or a different thread size should look at other configurations.

300 psi pressure rating

The maximum operating pressure of 300 psi is the critical limit for safe use. System pressure must stay at or below this figure to prevent failure. The heavy-duty Schedule 80 polypropylene body supports this rating. Verify your system requirements against this value before installation.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $5.99
Cheaper than about 92% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameBanjo
Model nameHB200-90
Product typeDrain Components
Product colorBlack
Size & build
Main materialHAWA

Questions about this item

How often should I inspect the HAWA glass-reinforced polypropylene body for stress cracking or chemical degradation?

Inspect the fitting at each system shutdown or at least quarterly; look for whitening, surface crazing or thread distortion that would indicate the Schedule 80 wall is nearing its service limit.

What pressure or temperature ceiling will the 2" NPT threads and barb hit first during continuous 300 psi operation?

The 300 psi maximum operating pressure is the primary limit; sustained use at that rating leaves no margin for pressure spikes, so a relief valve or regulator should keep peaks below 300 psi.

Will the black HAWA polypropylene fitting radiate noticeable heat or require extra cooling when fluid runs at 300 psi all day?

Polypropylene does not generate heat; the fitting will assume the fluid temperature, so cooling is only needed if the process fluid itself exceeds the material's safe continuous-use temperature.

More in Drain Stoppers, Strainers & Traps

Similar items