Banjo NIP150-6 1-1/2" MNPT x 6" TBE Polypropylene Pipe Nipple Sch 80 trap
Schedule 80 polypropylene nipple with 1-1/2 inch male NPT threads on both ends, 6 inches long, rated to 150 psi and 150 degrees F for non-potable chemical-resistant service
- Product typeDrain Components
- Main materialHAWA
- Product colorBlack
- Schedule 80 rating handles 150 psi pressure
- Polypropylene construction resists chemical corrosion
- 150 °F maximum operating temperature suits hot lines
- Male NPT threads connect without adapters
- Black finish identifies non-potable water lines
Schedule 80 polypropylene nipple
This 1-1/2 inch male NPT pipe nipple is made from black polypropylene for non-potable water systems. It suits installers who need chemical-resistant Schedule 80 fittings in industrial or agricultural plumbing. The threaded ends connect directly to compatible female NPT ports without adapters.
Pressure and temperature envelope
The fitting handles a maximum operating pressure of 150 psi across a temperature range of 0 to 150 degrees Fahrenheit. It maintains structural integrity under sustained pressure rather than only brief test spikes. The polypropylene construction resists degradation from many chemicals found in process lines.
Thermal and chemical behaviour
Polypropylene remains stable at the rated temperature limits without softening or becoming brittle in normal service. The material does not corrode or add taste to the fluid stream. Its lightweight nature reduces mechanical stress on connected piping during thermal cycling.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 92% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Banjo |
| Model name | NIP150-6 |
| Product type | Drain Components |
| Product color | Black |
| Size & build | |
| Main material | HAWA |
Questions about this item
Does the polypropylene nipple get hot or noisy when water runs through it continuously at 150 psi?
The Schedule 80 polypropylene nipple has no moving parts, so it produces no noise and does not generate heat under continuous flow at the rated 150 psi.
What thread sealant or tape do I need to make the 1-1/2" MNPT connections leak-free?
Use PTFE tape or pipe-thread sealant rated for Schedule 80 polypropylene fittings on the 1-1/2" male NPT threads.
Will this black Schedule 80 nipple thread directly into my existing galvanised steel piping?
The male NPT threads match standard 1-1/2" NPT female openings, so it threads into galvanised steel, but use a dielectric union if dissimilar-metal corrosion is a concern.
More in Drain Stoppers, Strainers & Traps
Similar items
Cherne
Cherne 270237 3 in End-of-Pipe Plug with Wing Nut
- Drain Components
- HAWA
$5.99
0.00007318BTC
In stock
Nomaco Kflex
Nomaco Kflex 801-T-048238 Trap 2-3/8" x 59/64
- Drain Components
- Black
$5.99
0.00007318BTC
In stock
Banjo
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
$13.99
0.00017092BTC
In stock