We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black polypropylene Schedule 80 pipe nipple, 3 inch by 6 inch, male NPT threads both ends

Banjo

Banjo NIP300-6 3 in 6 in Schedule 80 Polypropylene Trap

SKU CH-YRX7-J9CKY MPN NIP300-6

Schedule 80 polypropylene nipple with 3-inch male NPT threads handles 150 psi and 150 °F for chemical-resistant non-potable lines

  • Product typeDrain Components
  • Main materialHAWA
  • Product colorBlack
  • Chemical-resistant polypropylene handles aggressive fluids
  • Schedule 80 walls rated for 150 psi working pressure
  • Operates reliably from 0 to 150 Degrees F
  • 3 in NPT male threads connect directly to fittings
  • 6 in overall length suits tight piping runs

3-inch Schedule 80 Polypropylene Nipple

This black polypropylene pipe nipple joins two female NPT fittings in non-potable water systems. The Schedule 80 wall handles 150 psi at temperatures from 0 to 150 degrees F. Its chemical-resistant material suits industrial and agricultural plumbing where corrosion is a concern. The 3-inch nominal size and 6-inch overall length fit standard Schedule 80 piping layouts.

Threaded Male NPT Connections

Both ends carry male NPT threads that seal directly into female couplers, valves or tanks without extra adapters. The polypropylene threads resist galling and chemical attack better than metal in aggressive fluids. Under sustained pressure the material holds its shape and does not creep like thinner-wall fittings. Installation requires only standard pipe sealant or tape on the threads.

150 psi Pressure Rating Decides Fit

The 150 psi maximum operating pressure is the single figure that determines whether this nipple matches your system design. If your circuit runs higher pressure you need a different fitting. Buyers who need a higher pressure rating or a different nominal pipe size should select another component.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $15.99
Cheaper than about 72% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameBanjo
Model nameNIP300-6
Product typeDrain Components
Product colorBlack
Size & build
Main materialHAWA

Questions about this item

How much heat can the polypropylene nipple handle when it runs continuously?

The nipple is rated for a maximum operating temperature of 150 degrees Fahrenheit, so it will tolerate sustained heat up to that level.

What piping does the 3-inch Schedule 80 nipple need to connect properly?

Both ends have male NPT threads, so it joins directly to female NPT fittings of the same nominal size and schedule.

Will the black Schedule 80 nipple mate with older galvanised fittings I already own?

Only if those fittings are female NPT with matching 3-inch nominal size and Schedule 80 wall thickness; otherwise the threads will not seal.

More in Drain Stoppers, Strainers & Traps

Similar items