Banjo TEE300 3" FNPT Tee Schedule 80 Trap
A Schedule 80 polypropylene tee with three 3-inch FNPT connections rated for 150 psi from -20 to 150 degrees F
- Product typeDrain Components
- Product colorBlack
- 3-inch FNPT connections fit standard plumbing layouts
- Schedule 80 polypropylene withstands 150 psi working pressure
- Operates from -20 °F to 150 °F for hot or cold lines
- Black UV-stable material resists outdoor degradation
- Three-way tee design simplifies branch connections
Application Scope
The Banjo TEE300 is a Schedule 80 polypropylene tee designed for three-inch FNPT connections on all three ports. It suits installers who need a black, chemical-resistant junction rated for 150 psi across a -20 to 150 degree Fahrenheit range.
Installation Notes
The FNPT threads accept standard male NPT pipe without special tools, and the lightweight polypropylene body reduces handling strain. Over-tightening can split the plastic hubs, so hand-tight plus one turn is the usual practice; sealant compatible with polypropylene should be used to prevent leaks at the joints.
Sustained Service
Under continuous pressure the Schedule 80 wall resists creep better than thinner schedules, and the material holds its pressure rating throughout the full temperature span. Cyclic thermal expansion is absorbed by the polypropylene without fatigue cracking, provided the piping system includes proper support spacing.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $38.99
- Pricier than about 55% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Banjo |
| Model name | TEE300 |
| Product type | Drain Components |
| Product color | Black |
Questions about this item
How can I confirm the TEE300 tee is sealed correctly after threading it onto 3" FNPT pipes?
Pressurise the system up to 150 psi and inspect each FNPT joint for leaks; the Schedule 80 polypropylene body is rated for -20 to 150 °F, so it will hold pressure across that range when installed properly.
What comes with the TEE300 and what must I source separately?
The box contains only the black Schedule 80 polypropylene tee with three FNPT ports; you must supply 3" NPT pipe nipples, thread sealant or tape, and any mounting brackets required for your layout.
Which version of the TEE300 should I choose for a 3" FNPT drain line rated to 150 psi?
The single listed model TEE300 is a 3" FNPT Schedule 80 polypropylene tee rated at 150 psi and -20 to 150 °F, so it matches that specification directly.
More in Drain Stoppers, Strainers & Traps
Similar items
HAYWARD POOL PRODUCTS INC TC10025T Check Valve Trap
- Drain Components
- HAWA
Legris 3171 56 20 Push-Fit Adapter 1/4 in Brass 10
- Drain Components
- Metal





