We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White polypropylene inline ball valve with lever handle and threaded ends

Banjo

Banjo V300FP 3" FNPT Polypropylene Ball Valve 200 psi

SKU CH-MEX0-18P3H MPN V300FP

Full-port polypropylene ball valve with FKM seals and stainless-steel bolts rated for 200 psi

  • Product typeDrain Components
  • Full-port design for unrestricted flow
  • 200 psi maximum operating pressure
  • Diamond-turned ball ensures precise sealing
  • PTFE self-lubricating seats prevent sticking
  • Fiberglass-reinforced polypropylene for strength

Full-port polypropylene ball valve

The Banjo V300FP is a 3-inch FNPT inline valve built from fiberglass-reinforced polypropylene. Diamond-turned ball geometry and PTFE seats give smooth, low-torque operation with FKM seals rated for 200 psi maximum pressure. Stainless steel hardware completes the assembly.

Ideal for corrosive fluid lines

Suits installers needing a full-bore plastic valve that resists chemical attack and will not bind after long idle periods. Not for systems exceeding the 200 psi rating, for high-temperature steam service, or for applications requiring metal-to-metal seating.

200 psi pressure rating

The 200 psi maximum operating pressure is the single figure that decides whether this valve fits the system design. Verify the line pressure stays at or below this value before specifying the V300FP.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $103.99
Pricier than about 78% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameBanjo
Model nameV300FP
Product typeDrain Components

Questions about this item

Should I choose the 3" full-port version or a smaller size?

The 3" full-port design matches the nominal pipe diameter, so flow area equals the pipe bore — choose it when you need unrestricted flow through a 3" line.

What does the 200 psi rating mean once the valve is installed?

It is the maximum operating pressure the reinforced polypropylene body and FKM seals can sustain in service; system pressure must stay at or below this figure.

How does the FNPT thread standard affect what I can connect?

Female National Pipe Taper threads accept matching male NPT fittings, sealing on the taper without gaskets, and limit connections to components cut to the same thread form.

More in Drain Stoppers, Strainers & Traps

Similar items