Barrow Mods 2 in 1 accessory 10G SFP+ Twinax Cable 7m Orange
A 7 m passive SFP+ Twinax cable delivering 10 Gbps without separate transceivers, tested for signal integrity and MSA-compliant
- 10Gbps throughput for short-reach links
- Passive copper design cuts transceiver spend by 40%+
- 7-metre orange cable tested with TDR and VNA
- MSA-compliant EEPROM enables plug-and-play recognition
- Hot-swappable SFP+ ends for live network changes
10G SFP+ Direct Attach Cable
This seven metre orange Twinax cable provides a 10 Gbps passive link between SFP+ ports on switches, routers or network cards. It removes the cost and bulk of separate transceiver modules while supporting hot-swappable insertion.
Replacing transceiver pairs
The passive copper design cuts deployment expense by roughly 40 percent compared with buying two SFP+ optics and a fibre patch lead. Best practice suggests keeping switch-to-switch runs within five metres and NIC connections within three metres; at seven metres this cable suits switch-to-switch or top-of-rack layouts where active optical cable would be over-specified.
Build integration
MSA-compliant EEPROM over I2C enables automatic recognition across Cisco, Meraki, Ubiquiti, Intel, Netgear, Supermicro and other MSA gear, so the link comes up without configuration. The fixed seven metre length frees rack space otherwise used by transceiver cages and fibre management, while the orange jacket aids quick visual tracing in dense cable bundles.
How it compares
Measured against everything we stock in 2-in-1 Device Accessories, at today’s prices. Recalculated every night.
- Price $47.99
- Cheaper than about 64% of the 7,473 comparable items (median $56.99).
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What SFP+ port spacing does the 7 m twinax cable require?
The passive DAC uses standard SFP+ connectors compliant with MSA dimensions, so it fits any switch or NIC cage built to that specification.
How do I install the cable without damaging the latch, and what step do people skip?
Insert each end straight into the SFP+ cage until the latch clicks, then pull the release tab — not the cable body — when removing it; skipping the straight insertion often bends the latch.
When should I plan to replace this 7 m passive copper link?
Replace it if link errors appear, the cable is kinked, or you upgrade beyond 10 Gbps; passive copper is rated for the 10 Gbps spec and has no active components to wear out.
More in 2-in-1 Device Accessories
Similar items
Astro Gaming 2 in 1 Accessory Samsung BN59-01220A/E/G/B/M SEK-3500U
Microsoft GJ3-00001 Docking Station 2 in 1 Accessory
- Docking Station
- Full-Size
Aavara E8 Adjustable Aluminum Laptop Stand 10-17 inch
- Mount
- 14.33 in W × 12.83…
Microsoft QC7-00001 Surface Pro 4 Type Cover Black 2 in 1 accessory
- Keyboard Case
- Black





