APC APCRBC158 UPS Replacement Battery for BX1000M
- Battery
- APCRBC158, APC
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
12 V sealed lead-acid battery with four cells and 7.2 A capacity fits APC SMX UPS models rated 750 VA and 1000 VA
The Battery Technology APCRBC116-SLA116 is a 12 V sealed lead-acid battery designed to fit APC SMX750 and SMX1000 series uninterruptible power supplies. It uses a four-cell configuration rated at 7.2 A and 7200 mAh capacity. The spill-proof construction allows installation in any orientation without leakage risk.
Sealed lead-acid chemistry produces no audible noise during float charging or standby operation. The battery accepts a continuous trickle charge from the UPS without generating measurable heat under typical office loads. Self-discharge remains low when the unit is kept at room temperature and fully charged.
During extended discharge the voltage curve follows standard lead-acid characteristics, delivering steady current until the UPS initiates shutdown. The 18-month limited warranty covers capacity retention under normal cycling conditions. Compliance with WEEE and China RoHS directives confirms regulated material handling.
Measured against everything we stock in UPS Replacement Batteries, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Battery Technology |
| Model name | APCRBC116-SLA116 |
| Product type | Battery |
| Size & build | |
| Shipping weight | 11.34 kg |
| Package size | 533 × 279 × 178 mm |
Power off and unplug the UPS, open the battery door, disconnect the old pack noting the red-to-red and black-to-black leads, insert the new 12 V 7.2 A pack, reconnect the leads in the same order, close the door, then power on and let the UPS run a self-test to recognise the new battery.
The sealed spill-proof design needs no routine maintenance; replace the pack when runtime falls short of your load requirements, typically after several years of service.
The 7.2 A capacity determines how long the UPS can sustain the connected load; once the stored energy is depleted the UPS will shut down to protect the battery.
More in UPS Replacement Batteries
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?