Beck C. H. 0330047408 Steel Pipe Nipple 3in NPTxNPT 8in
Steel pipe nipple with NPT threads on both ends for air, gases, non-potable water and oils at up to 300 psi
- Product colorTransparent
- Rated for 300 psi air, gas and non-potable water service
- Black anodized steel resists corrosion in harsh environments
- Welded Grade B construction meets demanding pressure requirements
- 150 psi steam rating at 360 °F for high-temperature lines
- Made in USA with 3 in NPT threads on both ends
Steel Pipe Nipple for Air, Gas and Oil Lines
This Beck steel pipe nipple connects threaded pipe runs in air, gas and non-potable water systems. It is manufactured in the USA from Grade B steel with a welded construction and a black anodised finish. The fitting carries an NPT thread on both ends for direct installation.
Suited for Industrial Piping Up to 300 psi
Installers working with compressed air, inert gases or oil circuits at pressures up to 300 psi at 150 °F will find the nipple compatible. It is not intended for potable water supply, steam lines above 150 psi at 360 °F or applications requiring a certified drinking-water component.
Sustained Pressure Performance
The welded Grade B steel body maintains its seal under continuous operating pressure of 300 psi at 150 °F without deformation. Steam service is rated for 150 psi at 360 °F, so the nipple handles prolonged thermal cycles in non-potable systems.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $50.99
- Pricier than about 63% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | BECK |
| Product color | Transparent |
Questions about this item
What pipe size and thread type must my existing piping have to connect this 3 in NPT nipple?
Your piping must be 3 in nominal size with NPT threads on both ends to match this nipple.
Will the 300 psi pressure rating at 150 Degrees F handle the same loads as my older steel fittings?
Yes, the nipple is rated for 300 psi at 150 Degrees F and 150 psi steam at 360 Degrees F, matching typical Grade B steel fitting limits.
How can I verify the nipple is sealed and flowing correctly after installation?
Pressurise the system up to 300 psi at 150 Degrees F and check for leaks at the NPT joints; steady flow and no weeping confirm correct operation.
More in Drain Stoppers, Strainers & Traps
Similar items
Legris
Legris 3101 06 10 Push-Fit Adapter 6mm 1/8in Brass 10pk
- Drain Components
- HAWA
$50.99
0.00062194BTC
In stock
Banjo
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
$13.99
0.00017064BTC
In stock
Legris
Legris 3199 06 17 Male Elbow 6mm OD 290 PSI PK10
- Drain Components
- HAWA
$50.99
0.00062194BTC
In stock