We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black anodised steel pipe nipple, 1 1/4 inch NPT threads, 8 inch length

Beck C. H.

Beck C. H. Pipe Nipple Steel 1 1/4 in NPT 8 in

SKU CH-83VP-VJVJW

Steel pipe nipple handles air, gases, non-potable water and oils at 300 psi and 150 °F

  • Product colorTransparent
  • Grade B steel rated to 300 psi at 150 °F
  • Welded construction for leak-free air, gas and oil lines
  • Black anodized finish resists corrosion in non-potable water systems
  • Made in USA to consistent manufacturing standards
  • 1 1/4 inch nominal size with 1 3/8 inch inside diameter

1-1/4 in NPT Steel Pipe Nipple

This Beck C. H. pipe nipple connects air, gas, non-potable water or oil lines in plumbing and mechanical systems. The 8 in length suits tight runs where a standard coupling will not reach. It is built for new installations or maintenance repairs in commercial and industrial settings.

300 psi at 150 °F pressure rating

The welded Grade B steel nipple handles a maximum operating pressure of 300 psi at 150 degrees F and 150 psi steam at 360 degrees F. Black anodized finish protects the steel surface. Nominal pipe size is 1-1/4 in with 1-3/8 in inside diameter for full flow.

NPT taper threads seal with tape or paste

Apply PTFE tape or pipe dope to the male NPT threads before tightening to prevent leaks. Over-tightening can crack the fitting or strip threads, especially on welded nipples. The item is made in the USA and ships from Zoro; orders of $75 or more ship free.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $7.99
Cheaper than about 88% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameBECK
Product colorTransparent

Questions about this item

What does the 300 psi pressure rating mean when the nipple is installed in a system?

The nipple is rated for up to 300 psi at 150 °F, so it will hold that pressure in air, gas, oil or non-potable water lines without leaking.

How does the NPT thread standard affect what I can connect to it?

Both ends are 1 1/4 inch NPT tapered threads, so they seal when screwed into matching NPT fittings; the thread form itself limits the maximum pressure to the nipple's 300 psi rating.

What clearance and mounting style does the 8 inch length require?

The welded steel nipple is 8 inches long with a 1 3/8 inch inside diameter, so it needs straight pipe runs or fittings spaced to accept that length and the NPT thread engagement on each end.

More in Drain Stoppers, Strainers & Traps

Similar items