We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Steel pipe nipple 2 inch NPT 11 inch length black anodized finish

Beck C. H.

Beck C. H. Pipe Nipple Steel 2 in NPT 11 in

SKU CH-033A-YS2EB

A 2-inch NPT steel pipe nipple, 11 inches long, rated for 300 psi at 150 °F and 150 psi steam at 360 °F

  • Product colorTransparent
  • Handles air, gases, non-potable water and oils with 2 in NPT threads
  • Rated for 300 psi at 150 °F and 150 psi steam at 360 °F
  • Grade B steel construction welded for strength and leak resistance
  • Black anodized finish protects against corrosion in harsh environments
  • 11 inch overall length fits standard 2 inch nominal pipe installations

Product Identity

This Beck C. H. pipe nipple is a steel fitting with NPT threads on both ends, measuring 11 inches in overall length and sized for a 2-inch nominal pipe. It suits installers routing air, gases, non-potable water, oils or low-pressure steam in industrial or commercial piping systems.

Critical Specification

The fitting carries a maximum operating pressure of 300 psi at 150 degrees Fahrenheit and a maximum steam pressure of 150 psi at 360 degrees Fahrenheit, so the installer must verify that the system design stays within these limits.

Thermal and Power Behaviour

As a passive welded steel component, the nipple draws no power and generates no noise; its black anodized finish and Grade B steel construction simply withstand the stated temperature and pressure ranges during normal service.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $19.99
Cheaper than about 65% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameBECK
Product colorTransparent

Questions about this item

What does the 300 psi rating mean when the nipple is installed in a working system?

It is the maximum operating pressure the steel nipple can handle at 150 degrees Fahrenheit.

How does the NPT threading limit what I can connect to each end?

Both ends use 2 inch NPT taper threads, so only matching NPT fittings will seal properly.

What clearance and alignment does the 11 inch length require for mounting?

The nipple needs 11 inches of straight run between two female NPT ports with enough space to thread each end fully.

More in Drain Stoppers, Strainers & Traps

Similar items