We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Beyerdynamic

Beyerdynamic DT 770 Pro 250 Ohm Headphone 459046

SKU CH-VS7E-QBNP9 MPN 459046

Closed-back studio headphones with 250 ohm impedance for precise monitoring and mixing

  • Frequency range5 Hz-35 kHz
  • Headphone style< 0.2%
  • Impedance250 ohms
  • Power supplyPower handling capacity: 100 mW
  • ConnectionGold plated stereo jack plug (3.5 mm) and 1/4 in adapter (6.
  • Wearing styleCircumaural

Series DT 770 Pro

Model 250 Ohm

  • Closed-back design isolates sound for studio monitoring
  • 250 ohm impedance suits professional mixing equipment
  • 5 Hz to 35 kHz frequency range captures full audio spectrum
  • Replaceable velour ear pads maintain comfort during long sessions
  • 0 m coiled cable with 3.5 mm and 6.35 mm connectors offers flexible connectivity

250-ohm closed-back studio headphones

The Beyerdynamic DT 770 Pro 250 Ohm is a circumaural headphone built for professional monitoring and mixing. Its closed design isolates sound in studio environments while the 250-ohm impedance matches dedicated headphone amplifiers and professional audio interfaces. The 3-metre coiled cable and included 6.35 mm adapter suit fixed and mobile setups.

5 Hz–35 kHz response with <0.2% THD

The driver covers a wide frequency range and keeps total harmonic distortion below 0.2 percent, revealing low-end detail and high-frequency nuance. Power handling is rated at 100 mW, providing clean headroom for transient peaks. The 250-ohm load demands a capable amplifier; portable devices without dedicated gain will not drive these to sufficient volume.

Upgrades entry-level monitoring headsets

Users moving from low-impedance consumer headphones or basic 32-ohm studio models gain tighter bass control, lower distortion and the durability of replaceable velour pads. The jump is worthwhile when a studio amplifier or interface with adequate output impedance is already in place; without that upstream gear the higher impedance becomes a bottleneck.

How it compares

Measured against everything we stock in Earbuds & Over-Ear Headphones, at today’s prices. Recalculated every night.

Price $246.99
Pricier than about 90% of the 7,078 comparable items (median $25.99).

Specifications

Product
Brand nameBeyerdynamic
Product lineDT
Model nameDT 770 Pro 250 Ohm
Part number459046
Product typeHeadphone
Product colorBlack
Audio & video
Frequency range5 Hz-35 kHz
Headphone style< 0.2%
Impedance250 ohms
Wearing styleCircumaural
Ports & slots
ConnectionGold plated stereo jack plug (3.5 mm) and 1/4 in adapter (6.35 mm)
Power
Power supplyPower handling capacity: 100 mW
Size & build
Cord length9.84 ft coiled cable
Product weight0.6 lb (0.27 kg)
Shipping weight0.69 kg
Package size229 × 221 × 114 mm

Other versions of this model

3 more in the same range

Questions about this item

Will the 250-ohm impedance work properly with my older laptop headphone jack?

The 250-ohm input impedance is designed for professional studio equipment; a standard laptop jack may not deliver enough voltage for full volume.

How can I verify the headphones are reproducing the full 5Hz-35KHz range accurately?

Play a calibrated frequency sweep and listen for even output across the spectrum; the <0.2% THD spec means distortion should stay inaudible at monitoring levels.

Does the box include both the 3.5 mm plug and the 6.35 mm adapter, or must I buy the adapter separately?

Both the gold-plated 3.5 mm stereo jack plug and the 6.35 mm adapter are supplied in the box; no separate purchase is needed.

More in Earbuds & Over-Ear Headphones

Similar items