We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red gold silk PLA filament spool 1.75mm

BFKK

BFKK 1.75mm Silk PLA Filament Red Gold Dual Color 1kg

SKU CH-7AWP-ZP1NJ

Dual-colour 1.75 mm silk PLA filament on a 1 kg spool prints pearlescent red-gold surfaces without polishing

  • Silk-like pearlescent finish without polishing
  • Dual-colour coextrusion prints two shades in one spool
  • 75 mm diameter tolerance ensures consistent feeding
  • Compatible with most FDM printers and 3D pens
  • 100 % tangle-free on the spool

Silk PLA for multi-colour prints

BFKK 1.75 mm Silk PLA filament combines two colours in a single strand so one spool produces prints with a red-gold gradient. The co-extruded material is aimed at makers who want pearlescent surfaces without post-processing and who print on common FDM machines or 3D pens.

Low-odour feed with tight tolerance

The filament holds a 1.75 mm diameter tolerance that promotes consistent feeding and reduces jams or warping during normal use. Low odour and bubble-free extrusion keep the printing environment pleasant while the silk-like finish emerges straight from the nozzle.

Nozzle guidance and tangle prevention

A fresh 0.4 mm or larger nozzle is recommended to realise the best surface quality from the silk formulation. Each spool ships 100 % tangle-free; securing the free end in the spool holes after every print prevents knots and ensures reliable feeding for the next session.

How it compares

Measured against everything we stock in 3D Printing Accessories & Materials, at today’s prices. Recalculated every night.

Price $50.99
Pricier than about 67% of the 592 comparable items (median $31.99).

Specifications

No published specifications for this item yet.

Questions about this item

How do I load the 1.75mm Silk PLA onto my FDM printer without the first layer failing?

Mount the spool so filament unwinds counter-clockwise, push the tip straight through the PTFE tube into the hot-end, and extrude until the dual red-gold colour flows cleanly; the step most people skip is seating the filament fully against the nozzle before starting the print.

What upkeep does the 1 kg spool need after it is opened?

After every print, clip the free end into the spool’s side holes to keep the factory 100 % tangle-free state; store the coil in a sealed bag with desiccant because PLA absorbs moisture and will bubble or jam on the next run.

What is the first limitation I will hit when printing long jobs with this Silk PLA?

The 1.75 mm diameter tolerance and silk additive mean heat builds up in the melt zone; on extended prints the filament can soften inside the PTFE tube and cause a jam, so watch for under-extrusion as the earliest sign.

More in 3D Printing Accessories & Materials

Similar items