Bipra 2 in 1 accessory 10 × #8 screws 6 × 5/16" studs 250 A 48 V pair red black
Power distribution block with ten #8 screw terminals and six 5/16" studs rated 250 A at 48 VDC
- 10 #8 screws and 6 studs give plenty of connection points
- 250 A continuous capacity handles heavy-duty DC loads
- 48 V DC rating suits automotive, marine and RV systems
- Nickel-plated brass busbars provide low resistance and corrosion protection
- Insulated nylon base and protective cover prevent accidental shorts
Power Distribution Block Pair
This set includes two bus bars, one red and one black, designed to organise DC wiring in vehicles, boats or RVs. Each block provides ten #8 screw terminals and six 5/16" stud posts for secure cable connections. The pair suits installers who need a tidy, labelled positive and negative distribution point.
250 A Continuous Capacity
The assembly is rated for a maximum continuous current of 250 A across the entire block at up to 48 VDC. Individual connections can handle a brief 20 A surge for less than one minute. Builders requiring higher per-circuit limits or AC voltage ratings should look elsewhere.
Nickel-Plated Brass Bus Bars
Conductive plates are nickel-plated brass for low resistance and corrosion protection. An insulated nylon base and a frosted polycarbonate cover shield live parts from accidental shorts. No active cooling is required; the blocks dissipate heat passively during normal operation.
How it compares
Measured against everything we stock in 2-in-1 Device Accessories, at today’s prices. Recalculated every night.
- Price $42.99
- Cheaper than about 75% of the 7,473 comparable items (median $56.99).
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Will the 250 A bus bar fit alongside my existing 5/16" stud terminals?
Yes, the block includes six 5/16" studs plus ten #8 screws, so it can connect directly to the same stud size you already use.
How do I verify the 48 VDC block is operating correctly after wiring?
With power applied, measure voltage across the nickel-plated brass plates and confirm continuity through each of the sixteen terminals; the frosted cover lets you inspect connections visually.
What hardware comes in the pair and what must I supply?
The box contains two blocks (red and black) with ten #8 stainless screws and six 5/16" studs each; you provide the ring terminals and cables sized for up to 250 A continuous.
More in 2-in-1 Device Accessories
Similar items
Mind Reader Pu-20 Black Vegan Leather Portfolio 14.33in
- 14.33 in W × 12.83…
- Black
Microsoft GJ3-00001 Docking Station 2 in 1 Accessory
- Docking Station
- Full-Size
Microsoft QC7-00001 Surface Pro 4 Type Cover Black 2 in 1 accessory
- Keyboard Case
- Black





