We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black RG-6 coaxial cable on reel with nickel-plated brass compression connectors

Bolton Technical

Bolton Technical RG-6 200ft Triple Shield 75 Ohm Coaxial Cable 2 in 1 accessory

SKU CH-THDA-9AG51

Triple-shield 18 AWG RG-6 coaxial cable with 77 % braid, 100 % foil and 75 Ohm rating for indoor and outdoor use

  • Triple-shield construction blocks signal loss with 100% foil and 77% braid coverage
  • UV-resistant PVC jacket withstands outdoor exposure for indoor and outdoor installation
  • Nickel-plated brass compression connectors deliver gas-tight seals with 21mm design
  • Swept tested to 75 Ohm impedance for CATV, satellite and broadband use
  • Assembled in USA across 8 facilities using 18AWG triple-shield RG-6 cable

RG-6 coaxial cable for signal distribution

This 200-foot triple-shield RG-6 coaxial cable carries 75-ohm signals for satellite TV, broadband internet, over-the-air HD antenna and ham radio setups. The 18 AWG centre conductor is wrapped in gas-injected foam PE dielectric, dual 100-percent foil shields and a 77-percent aluminum-alloy braid. Nickel-plated brass compression connectors with 21-millimetre bodies provide a gas-tight seal. The UV-resistant PVC jacket is rated for indoor and outdoor runs.

Build integration: single-cable runs to multiple

The cable arrives terminated with compression connectors, so it connects directly to F-type ports on splitters, amplifiers, modems or antenna masts without extra crimping tools. Its swept-tested construction meets SCTE and UL ETL benchmarks, reducing the need for in-line signal boosters on long drops. The triple-shield stack rejects ingress from nearby power lines or RF sources, freeing headroom for clean digital transport across the whole 200-foot length.

Upgrade path: replacing dual-shield

Installers swapping out older dual-shield RG-6 or raw spool cable gain the 100-percent foil layers and factory-fitted connectors in one step. The jump is worth it when existing runs show pixelation, modem sync drops or high bit-error rates on satellite and broadband links. Builders who need plenum-rated jackets, alternative connector types or lengths beyond 200 feet should look at other cable families.

How it compares

Measured against everything we stock in 2-in-1 Device Accessories, at today’s prices. Recalculated every night.

Price $47.99
Cheaper than about 64% of the 7,473 comparable items (median $56.99).

New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

How far can the 200ft RG-6 run before signal loss becomes the limiting factor on a 75 Ohm system?

The 200ft length is swept tested for 75 Ohm applications, but the exact distance where attenuation becomes the primary limit depends on the frequency and service in use.

Does the triple-shield construction with 77% braid and 100% foil keep the cable cool and quiet during continuous outdoor exposure?

The UV-resistant PVC jacket and aluminium shielding are passive; they produce no noise or heat, and the materials are rated for sustained indoor and outdoor service.

Which devices must already have an F-connector coaxial port for this 21mm nickel-plated brass connector to work?

Any HD antenna, satellite receiver, cable modem, ham radio or cellular booster that uses a standard F-type coaxial interface will mate directly with these connectors.

More in 2-in-1 Device Accessories

Similar items