Brute Networks 16GB DDR4-2400 ECC UDIMM 2Rx8 CL15 1.2V 862976-B21
16 GB DDR4-2400 ECC UDIMM with CL15 latency, 2Rx8 organisation and 1.2 V operation for compatible servers
- Total capacity16 GB
- Rated speedDDR4 2400 (PC4 19200)
- ChipsetMajor Brand Chipset
- CAS latencyCL15
- Rated voltage1.2 V
- Buffer typeUnregistered
- 16GB DDR4 capacity expands server memory headroom
- ECC protection detects and corrects single-bit data errors
- 2400MHz speed with CL15 latency delivers responsive throughput
- 2V operation reduces power draw per module
- 2Rx8 dual-rank layout increases memory density per slot
HP Compatible 16GB DDR4-2400 ECC UDIMM
This HP compatible module delivers 16GB of DDR4-2400 ECC unregistered memory. It operates at 1.2V with a CAS latency of CL15 and uses a 2Rx8 rank configuration on a 288-pin UDIMM form factor. The part is equivalent to HP 862976-B21 and built with major brand components.
Suits servers needing HP qualified ECC UDIMMs
Administrators upgrading HP ProLiant or compatible platforms that require unbuffered ECC memory at the PC4-19200 speed grade can use this module. Systems that require registered RDIMMs, load-reduced DIMMs, non-ECC memory, or a different pin count cannot accept this part.
The PC4-19200 DDR4-2400 speed grade
This module runs at 2400 MT/s with a CL15 latency at 1.2V. If the platform demands a higher or lower JEDEC speed grade, registered buffering, or a different voltage, this DIMM will not be compatible.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $181.99
- Typical for this category: the median of 6,523 items is $188.99.
- Total capacity 16 GB
- Lower than about 60% of the 6,064 comparable items (median 32 GB).
- Price per GB $11.37 per GB
- Pricier than about 71% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | HP |
| Total capacity | 16 GB |
| Product type | 288-Pin DDR4 SDRAM |
| Performance | |
| Rated speed | DDR4 2400 (PC4 19200) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL15 |
| ECC support | Yes |
| Buffer type | Unregistered |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.2 V |
Questions about this item
My board takes 288-pin DDR4 UDIMMs — is that what this module uses?
Yes, this is a 288-pin DDR4 UDIMM running at 1.20V with ECC, so it fits standard DDR4 UDIMM slots that support ECC memory.
If I add this 2400MHz stick to a server that already has slower DDR4 modules, what speed will the system run at?
The memory controller will clock all installed modules down to the lowest common speed, so this 2400MHz module will run at whatever frequency your existing DDR4 memory operates at.
After installing the module, how can I confirm the server sees the full 16GB and that ECC is active?
Check the BIOS memory information or the OS memory report — it should show 16GB for this DIMM and indicate ECC enabled for the memory subsystem.
More in ECC Server RAM
Similar items
Kingston Technology Corp. KTH-PL432D8P/16G 16GB DDR4 3200 ECC Registered server RAM
- 16 GB
- DDR4 3200
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
Brute Networks 32GB DDR4-2400 CL15 2Rx4 Registered RDIMM 843315-S21
- 32 GB
- DDR4 2400
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
Brute Networks 16GB DDR4-2400 ECC UDIMM CL15 1.2V Dell Compatible
- 16 GB
- DDR4 2400





