Brute Networks 370-ACHM-BN 8GB DDR4 2133 ECC UDIMM 2Rx8 CL15 1.2V
Dell-compatible 8 GB DDR4-2133 ECC UDIMM with CL15 latency and 1.2 V operation
- Total capacity8 GB
- Rated speedDDR4 2133 (PC4 17000)
- ChipsetMajor Brand Chipset
- CAS latencyCL15
- Rated voltage1.2 V
- Buffer typeUnregistered
- 8GB DDR4 2133MHz capacity for server workloads
- CL15 latency at 1.20V for efficient operation
- ECC UDIMM 2Rx8 protects data integrity
- 288-pin PC4-17000 form factor fits Dell systems
- Major-brand chips validated 100% compatible with Dell 370-ACHM
Dell Compatible 8GB DDR4 ECC UDIMM
Brute Networks 370-ACHM-BN is an 8GB DDR4-2133 ECC unbuffered DIMM built to match Dell part number 370-ACHM. It uses major-brand DRAM chips and meets OEM specifications for server and workstation upgrades. The module runs at 1.20V with a CL15 latency and a 2Rx8 organisation.
Suitable for Dell systems needing PC4-17000 ECC
This module fits Dell platforms that require 288-pin DDR4 ECC UDIMMs at 2133 MHz. It will not work in systems that only accept registered or load-reduced DIMMs. Buyers needing non-ECC memory or higher speeds should look elsewhere.
288-pin DDR4 ECC UDIMM at 2133 MHz
The single specification that decides fit is the 288-pin DDR4 ECC UDIMM form factor running at DDR4-2133 (PC4-17000). Verify that your Dell server or workstation supports unbuffered ECC memory at this speed before ordering.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $30.99
- Cheaper than about 90% of the 6,523 comparable items (median $188.99).
- Total capacity 8 GB
- Lower than about 80% of the 6,064 comparable items (median 32 GB).
- Price per GB $3.87 per GB
- Cheaper than about 83% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Dell |
| Total capacity | 8 GB |
| Product type | 288-Pin DDR4 SDRAM |
| Performance | |
| Rated speed | DDR4 2133 (PC4 17000) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL15 |
| ECC support | Yes |
| Buffer type | Unregistered |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.2 V |
Questions about this item
How do I install the 288-pin DDR4 UDIMM in my Dell server, and what step is often missed?
Align the notch on the 288-pin DDR4 UDIMM with the slot key, press firmly until both retention clips click, then verify in BIOS that the module reports 2133 MHz CL15 at 1.2 V.
What maintenance or replacement will the 8 GB ECC UDIMM need later?
The module has no moving parts and requires no scheduled maintenance; ECC corrects single-bit errors automatically, so replacement is only needed if multi-bit errors appear in system logs.
What limit appears first when the 2Rx8 DDR4-2133 kit runs sustained workloads?
The 2133 MHz CL15 timing and 1.2 V voltage ceiling cap sustained throughput; the dual-rank 2Rx8 organisation helps density but does not raise the frequency ceiling.
More in ECC Server RAM
Similar items
SK hynix 4GB DDR3 1066 PC3-8500 2Rx4 ECC REG Server Memory HMT151R7BFR4C-H9
- 4 GB
- DDR3 1066
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
SK hynix HMT42GR7AFR4C-RD 16GB DDR3 1866 ECC Registered CL13 1.50V 2Rx4 server RAM
- 16 GB
- DDR3 1866
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
A-Tech 16GB (2x8GB) DDR3L 1600 ECC RDIMM 2Rx4 1.35V Server RAM
- 16 GB (2 × 8 GB)
- DDR3L 1600





