Brute Networks 8GB DDR4-2133 ECC SODIMM CL15 1.20V 2Rx8
8 GB DDR4-2133 ECC SODIMM module with CL15 latency and 1.20 V operation for HP-compatible server upgrades
- Total capacity8 GB
- Rated speedDDR4 2133 (PC4 17000)
- ChipsetMajor Brand Chipset
- CAS latencyCL15
- Rated voltage1.2 V
- Buffer typeUnregistered
- 8GB DDR4-2133 expands server memory capacity
- CL15 latency at 2133MHz supports responsive workloads
- 20V operation reduces power draw per module
- 2Rx8 dual-rank layout increases memory density
- HP T0H90AA equivalent ensures drop-in compatibility
HP Compatible DDR4 Server Memory
This 8 GB DDR4-2133 SODIMM is built for HP servers and workstations that require ECC protection. It delivers 8 GB of registered‑free capacity at 1.20 V with a CAS latency of CL15.
Upgrade from lower capacity or non-ECC modules
Replacing 4 GB sticks or non-ECC memory with this 8 GB ECC module adds error correction and doubles density per slot. The jump is worthwhile when your workload demands data integrity and the platform supports DDR4-2133 speeds.
Verify slot type, voltage and rank support
Confirm the system accepts 288‑pin DDR4 SODIMMs at 1.20 V and can address 2Rx8 ranks. Check the motherboard manual or vendor documentation for maximum supported capacity per slot before ordering.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $38.99
- Cheaper than about 88% of the 6,523 comparable items (median $188.99).
- Total capacity 8 GB
- Lower than about 80% of the 6,064 comparable items (median 32 GB).
- Price per GB $4.87 per GB
- Cheaper than about 74% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | HP |
| Total capacity | 8 GB |
| Product type | 288-Pin DDR4 SDRAM |
| Performance | |
| Rated speed | DDR4 2133 (PC4 17000) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL15 |
| ECC support | Yes |
| Buffer type | Unregistered |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.2 V |
Questions about this item
Will the 288-Pin DDR4 module fit in a standard SODIMM slot?
No. This module uses a 288-Pin DDR4 form factor, which is physically longer than the 260-Pin SODIMM standard. It requires a 288-Pin DIMM slot found on servers or workstations, not a laptop SODIMM socket.
What is the correct orientation step when installing this 2Rx8 DDR4-2133 stick?
Align the notch on the module's gold edge connector with the key in the 288-Pin slot. Press down firmly and evenly on both ends until the retention clips click shut. The common error is pressing only one corner, leaving the opposite side unseated.
Does the major-brand chipset on this ECC SODIMM require active cooling or periodic replacement?
No active cooling or scheduled replacement is needed. The module runs at the standard 1.20V and uses high-quality Samsung, SK Hynix, or Micron chips rated for continuous server operation. Dust the slot contacts with compressed air during routine chassis cleaning.
More in ECC Server RAM
Similar items
Kingston Technology Corp. KVR266X72C25/1G 1GB DDR 266 ECC Unbuffered server RAM
- 1 GB
- DDR 266 (PC 2100)
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
Kingston Technology Corp. KVR400D2D8R3/2G 2GB DDR2 400 ECC Registered server RAM
- 2 GB
- DDR2 400
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
Kingston Technology Corp. KVR16R11D8/8KF 8GB DDR3 1600 ECC Registered server RAM
- 8 GB
- DDR3 1600





