Brute Networks 8GB DDR4-2666 ECC UDIMM 1Rx8 CL15 1.2V 840755-091
8GB DDR4-2666 ECC UDIMM with CL15 latency and 1.2V operation for HP servers
- Total capacity8 GB
- Rated speedDDR4 2666 (PC4 21300)
- ChipsetMajor Brand Chipset
- CAS latencyCL15
- Rated voltage1.2 V
- Buffer typeUnregistered
- 8GB DDR4-2666 capacity expands server memory
- CL15 latency at 1.2V reduces access delay
- ECC UDIMM detects and corrects data errors
- 1Rx8 major-brand chips match OEM specifications
- HP 840755-091 compatible for validated integration
8GB DDR4-2666 ECC UDIMM
This Brute Networks module is an 8 GB DDR4-2666 ECC UDIMM built with major-brand chips. It runs at PC4-21300 speed with CL15 latency and 1.20 V operation. The stick is 100 percent HP compatible and matches part number 840755-091 for direct replacement in supported servers.
Suitable for HP server upgrades.
This memory suits administrators expanding HP servers that require ECC UDIMMs at DDR4-2666. Builders needing non-ECC modules, registered DIMMs, higher capacities or different voltages should look at other parts.
Deciding spec: ECC UDIMM at DDR4-2666
The single specification that decides fitment is the ECC UDIMM DDR4-2666 format. Only systems accepting unregistered ECC modules at this exact speed and voltage will support the part.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $73.99
- Cheaper than about 77% of the 6,523 comparable items (median $188.99).
- Total capacity 8 GB
- Lower than about 80% of the 6,064 comparable items (median 32 GB).
- Price per GB $9.25 per GB
- Pricier than about 64% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | HP |
| Total capacity | 8 GB |
| Performance | |
| Rated speed | DDR4 2666 (PC4 21300) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL15 |
| ECC support | Yes |
| Buffer type | Unregistered |
| Power | |
| Rated voltage | 1.2 V |
Questions about this item
Will this DDR4-2666 ECC UDIMM fit a standard 288-pin DIMM slot on an HP server motherboard?
Yes, the module follows the standard 288-pin DDR4 UDIMM form factor used by HP servers supporting PC4-21300 memory.
What is the correct way to seat this 1Rx8 module so the ECC function initialises properly?
Align the notch with the slot key, press firmly until both retention clips click, then verify 2666 MHz speed and ECC status in BIOS.
When should I consider replacing this 8GB stick if ECC corrected-error counts start rising?
Monitor the IPMI or iLO logs; sustained correctable errors on this module typically indicate it is time to swap it out.
More in ECC Server RAM
Similar items
Brute Networks 16GB DDR4-2133 ECC Registered RDIMM 2Rx4 CL15 1.2V 288-Pin
- 16 GB
- DDR4 2133
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
Brute Networks 8GB DDR4-2133 ECC Registered RDIMM 1Rx4 CL15 1.2V 03T7861
- 8 GB
- DDR4 2133
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
Brute Networks 8GB DDR4-2666 1Rx8 ECC Unbuffered server RAM
- 8 GB
- DDR4 2666





