We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 288-pin DDR4 UDIMM module with black chips

Brute Networks

Brute Networks 8GB DDR4-2933 1Rx8 1.2V non-ECC UDIMM server RAM

SKU CH-8DA0-BBGSV

8GB DDR4-2933 288-pin UDIMM at 1.2V for Dell-compatible server upgrades

  • Total capacity8 GB
  • Rated speedDDR3 2933 (PC3 23400)
  • ChipsetMajor Brand Chipset
  • Rated voltage1.2 V
  • Buffer typeUnregistered
  • Memory rank1Rx8
  • 8GB DDR4-2933 capacity handles heavy workloads
  • 2V operation reduces power draw and heat
  • 1Rx8 single-rank layout simplifies memory controller load
  • 288-pin UDIMM form factor fits standard server slots
  • 100% Dell AA101830 compatible for drop-in upgrades

Brute Networks 8 GB DDR4 UDIMM

This 8 GB DDR4 UDIMM module is built for desktop and workstation owners who need a straightforward memory upgrade. It uses a standard 288-pin form factor and runs at 1.20 V, matching the voltage used by many mainstream platforms. The module is sold new and carries a lifetime warranty from the supplier.

Check your DDR4 slot count and maximum speed

Before ordering, confirm that your motherboard has a free 288-pin DDR4 slot and can operate memory at 2933 MT/s. The module is single-rank 1Rx8 and non-ECC, so it will not work in systems that require registered or ECC memory. Verify the board’s maximum supported capacity per slot to avoid a mismatch.

Major-brand chips and Dell AA101830 equivalence

The stick is assembled with Samsung, SK Hynix or Micron components and is tested to meet or exceed the original Dell AA101830 specification. Unbuffered construction keeps installation simple: align the notch, press until the latches click, and the system recognises the extra 8 GB immediately. The low 1.2 V operation helps keep thermals modest during everyday workloads.

How it compares

Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.

Price $82.99
Cheaper than about 74% of the 6,523 comparable items (median $188.99).
Total capacity 8 GB
Lower than about 80% of the 6,064 comparable items (median 32 GB).
Price per GB $10.37 per GB
Pricier than about 69% of the 6,064 comparable items (median $7.25 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDell
Total capacity8 GB
Product type288-Pin DDR4 SDRAM
Performance
Rated speedDDR3 2933 (PC3 23400)
Processor
ChipsetMajor Brand Chipset
Memory
ECC supportYes
Buffer typeUnregistered
Memory rank1Rx8
Power
Rated voltage1.2 V

Questions about this item

Does the module ship as a single 8 GB stick or do I need to buy a kit?

The listing describes one 8 GB 288-pin DDR4 UDIMM; no additional sticks are included.

Should I choose this 2933 MHz 1Rx8 module or a different speed for my Dell system?

This part matches Dell AA101830 and runs at 2933 MHz PC4-23400; select it when your server requires that exact specification.

Will the rated 2933 MHz speed actually run at that frequency once installed?

The module is rated DDR4-2933 (PC4-23400) at 1.20 V; the system memory controller will negotiate the highest supported speed up to that limit.

More in ECC Server RAM

Similar items