We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 288-pin DDR4 server memory module with black chips and silver heat spreader

Brute Networks

Brute Networks 8GB DDR4-2933 ECC Registered 1Rx8 1.20V 288-Pin server RAM

SKU CH-1S4Y-7SZAQ

8GB DDR4-2933 ECC registered server memory, 1Rx8 at 1.20V on 288-pin DIMM, 100% HPE compatible with major-brand chips

  • Total capacity8 GB
  • Rated speedDDR4 2933 (PC4 23400)
  • ChipsetMajor Brand Chipset
  • Rated voltage1.2 V
  • Buffer typeRegistered
  • Memory rank1Rx8
  • ECC protection catches data errors using registered DDR4 technology
  • 2933 MHz DDR4 speed feeds data fast with PC4-23400 bandwidth
  • HPE P00918?K21 equivalent ensures drop-in server compatibility
  • 20 V operation cuts power draw on 288-pin modules
  • Major-brand Samsung, SK Hynix or Micron chips deliver 100% tested reliability

HPE Compatible 8 GB DDR4-2933 ECC Registered

This Brute Networks module delivers 8 GB of DDR4-2933 ECC registered memory for HPE servers. It uses a 1Rx8 organisation at 1.20 V and fits standard 288-pin DIMM slots. The stick is built with major-brand DRAM and validated for full OEM compatibility.

Capacity and headroom for typical server workloads

Eight gigabytes suits light virtualisation, file services or development boxes that do not exceed moderate memory pressure. Workloads with large in-memory databases, heavy container density or high VM counts will run out of headroom and need larger modules or more populated slots.

Thermals noise and power draw in normal operation

Registered DDR4 at 1.20 V runs cool under standard server airflow and adds minimal power draw to the system budget. No active cooling is required on the module itself and acoustic impact is negligible in a properly ventilated chassis.

How it compares

Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.

Price $113.99
Cheaper than about 64% of the 6,523 comparable items (median $188.99).
Total capacity 8 GB
Lower than about 80% of the 6,064 comparable items (median 32 GB).
Price per GB $14.25 per GB
Pricier than about 74% of the 6,064 comparable items (median $7.25 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameHPE
Total capacity8 GB
Product type288-Pin DDR4 SDRAM
Performance
Rated speedDDR4 2933 (PC4 23400)
Processor
ChipsetMajor Brand Chipset
Memory
ECC supportYes
Buffer typeRegistered
Memory rank1Rx8
Power
Rated voltage1.2 V

Questions about this item

Will the 8GB DDR4-2933 registered ECC module run reliably in an HPE server that already has PC4-23400 sticks installed?

Yes, the module is 100 percent HPE compatible and ships with identically matched sticks, so it will operate alongside existing PC4-23400 memory at 2933 MHz without mismatch.

How can I verify the 288-pin DDR4-2933 stick is operating at the correct 1.20V and registered ECC settings after installation?

Enter the server BIOS or iLO interface and confirm the memory reports 2933 MHz, 1.20 V, registered mode and ECC enabled for the new 8GB module.

Does the box contain only the 8GB 1Rx8 DDR4 RDIMM or are any extra brackets, cables or heat spreaders included?

Only the 8GB 288-pin DDR4-2933 registered ECC module is supplied; no additional brackets, cables or heat spreaders are included.

More in ECC Server RAM

Similar items