We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular SFP transceiver module with LC duplex connector and metal housing

Brute Networks

Brute Networks HP JF833A 100BASE-FX 2km 1310nm SFP transceiver

SKU CH-KBF8-B7C5R

A 100 Mbps multi-mode SFP transceiver with LC duplex connector, 1310nm wavelength and 2km reach for HP JF833A slots

  • Port count100Base-FX
  • Product typeTransceiver
  • Supported standardsMMF
  • Optical wavelength1310 nm
  • Fiber modeMulti-mode Optical Fiber
  • Maximum range2km
  • 100 Mbps connectivity over multi-mode fibre up to 2 km
  • 1310 nm wavelength optimised for 100BASE-FX standard links
  • LC duplex connector for direct patch-panel integration
  • MSA compliant and coded for full HP JF833A compatibility
  • Commercial 0 °C to 70 °C operating range for rack environments

100BASE-FX SFP for legacy fast-ethernet links

The Brute Networks HP JF833A compatible transceiver adds a 100 Mbps fibre port to switches and routers that still run 100BASE-FX. It targets network teams maintaining older campus or metro-edge segments where gigabit uplinks are not required. The module is coded for HP equipment and initialises without extra configuration. It suits environments that need a low-cost, drop-in replacement for an original HP JF833A.

Multi-mode reach limited to two kilometres

The transceiver operates at 1310 nm over multi-mode fibre with an LC duplex connector and is rated for a maximum link distance of 2 km. At 100 Mbps the interface cannot carry modern aggregated traffic loads and will saturate quickly on busy uplinks. The optical budget assumes standard multi-mode cable plant; longer runs or single-mode fibre will not work. Digital diagnostic monitoring is supported for real-time link health visibility.

Verify switch slot coding

Confirm the target device accepts third-party SFP modules coded for HP JF833A; some vendors lock ports to first-party optics only. Ensure the existing cabling is multi-mode with LC duplex terminations and that the planned link length stays within the 2 km rating. The module operates in a commercial temperature range of 0 to 70 °C, so outdoor or industrial enclosures may exceed its limits.

How it compares

Measured against everything we stock in SFP & SFP+ Transceiver Modules, at today’s prices. Recalculated every night.

Price $63.99
Cheaper than about 67% of the 1,471 comparable items (median $138.99).

Specifications

Product
Brand nameHP
Model nameJF833A
Product typeTransceiver
Performance
Transfer speed100 Mbit/s
Connectivity
Supported standardsMMF
Optical wavelength1310 nm
Fiber modeMulti-mode Optical Fiber
Maximum range2km
Ports & slots
Port count100Base-FX
Size & build
Product weight2 oz
Environment & compliance
Temperature range0? ~ 70? C
More details
Indicator lightsPower, Link/Activity, Full-Duplex, and Speed

Questions about this item

Which wavelength and reach should I select for my multimode fiber run?

The module operates at 1310nm and supports a 2km link over multimode fiber, matching the 100BASE-FX standard.

What throughput will I see once the SFP is installed in my switch?

The transceiver delivers a fixed 100 Mbps full-duplex rate on the port.

Does the LC duplex connector follow the MSA specification for SFP slots?

Yes, the transceiver is fully MSA compliant and fits any standard SFP port with an LC duplex interface.

More in SFP & SFP+ Transceiver Modules

Similar items