We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular 288-pin DDR4 memory module with black chips and gold contacts

Brute Networks

Brute Networks P00922-B21 HP Compatible 16GB DDR4-2933 ECC Registered RDIMM 2Rx8 1.2V

SKU CH-30YP-X75H1

Adds 16 GB of DDR4 ECC registered memory at 2933 MT/s to compatible HP servers

  • Total capacity16 GB
  • Rated speedDDR3 2933 (PC3 23400)
  • ChipsetMajor Brand Chipset
  • Rated voltage1.2 V
  • Buffer typeRegistered
  • Memory rank2Rx8
  • 16 GB ECC registered memory protects data integrity
  • DDR4-2933 speed feeds CPU cores without bottleneck
  • 2 V operation lowers server power draw
  • 2Rx8 dual-rank layout maximises capacity per slot
  • 100 % HP compatible keeps service contracts valid

Brute Networks 16GB DDR4-2933 ECC RDIMM

This Brute Networks module is a 16GB DDR4-2933 ECC registered RDIMM built to HP P00922-B21 specifications. It uses major-brand chips on a 288-pin DDR4 SDRAM PCB and runs at 1.2V. The 2Rx8 organisation provides error-correcting registered operation for server platforms that require registered memory.

Suits servers needing HP P00922-B21 compatible

Administrators expanding HP Gen10 or compatible platforms that call for PC4-23400 registered DIMMs will find this module a direct match. Systems that require unbuffered UDIMMs, load-reduced LRDIMMs, or a different voltage cannot use this part. Buyers needing capacities other than 16GB should select a different module.

2Rx8 registered ECC at DDR4-2933 decides fit

The single specification that determines compatibility is the 2Rx8 registered ECC organisation at DDR4-2933 (PC4-23400). The memory controller must support registered operation with this rank configuration and speed. Verify the platform qualified vendor list for P00922-B21 before installation.

How it compares

Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.

Price $178.99
Typical for this category: the median of 6,523 items is $188.99.
Total capacity 16 GB
Lower than about 60% of the 6,064 comparable items (median 32 GB).
Price per GB $11.19 per GB
Pricier than about 71% of the 6,064 comparable items (median $7.25 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameHP
Total capacity16 GB
Product type288-Pin DDR4 SDRAM
Performance
Rated speedDDR3 2933 (PC3 23400)
Processor
ChipsetMajor Brand Chipset
Memory
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Power
Rated voltage1.2 V

Questions about this item

Does this 288-pin DDR4 RDIMM require an empty slot on an HP server motherboard that supports registered ECC memory?

Yes, the module uses the standard 288-pin DDR4 form factor and registered ECC signalling, so it must be installed in a compatible HP server slot that accepts RDIMMs.

Can this 2Rx8 module be mixed with existing 1Rx4 or 2Rx4 DDR4-2933 RDIMMs in the same server?

Mixing different rank organisations is generally possible on HP platforms, but the memory controller will operate all modules at the lowest common speed and rank configuration supported by the CPU and BIOS.

How can I verify the module is recognised at 2933 MHz with ECC active after installation?

Check the BIOS memory configuration screen or run a tool such as dmidecode on Linux to confirm the reported speed shows 2933 MT/s and the ECC status reads enabled for the new DIMM.

More in ECC Server RAM

Similar items