Bryant 5669NC Straight Blade Connector 6-15R 15A 250V 2P3W
A 15 A, 250 V straight-blade connector with screw terminals for cables from .25 to .66 in diameter
- Product typeStraight Blade Devices
- Size or dimensions0.245 in to 0.655 in
- Rated for 15 A and 250 V AC single-phase power
- NEMA 6-15R configuration with 2 poles and 3 wires
- Industrial-grade nylon housing resists chemicals and impact
- Screw terminals accept up to 10 AWG conductors
- Fits cable diameters from .25 in to .66 in
Industrial Straight Blade Connector
The Bryant 5669NC is a 15 A, 250 V AC straight blade connector built to NEMA 6-15R configuration with two poles and three wires. Its nylon housing resists chemicals and impact, making it suitable for commercial and industrial environments where durable, grounded connections are required.
Upgrade from worn or lower-grade plugs
Replacing damaged or residential-grade connectors with this industrial-rated unit restores reliable power delivery for 250 V equipment. The jump is worthwhile when the existing device shows heat damage, loose terminals, or lacks the chemical and impact resistance demanded by the application.
Sustained-load behaviour
Screw-terminal wire connections accept up to 10 AWG conductors and clamp cables from 0.25 in to 0.66 in diameter, maintaining secure contact under continuous 15 A loads. The grounded, single-phase design and robust nylon body help prevent overheating and mechanical failure during extended operation.
How it compares
Measured against everything we stock in Electrical Enclosures & Cabinets, at today’s prices. Recalculated every night.
- Price $21.99
- Cheaper than about 67% of the 1,411 comparable items (median $39.99).
Specifications
| Product | |
|---|---|
| Brand name | BRYANT |
| Product type | Straight Blade Devices |
| Size & build | |
| Size or dimensions | 0.245 in to 0.655 in |
Questions about this item
What cable diameter range does the 5669NC connector accept?
The connector fits cables from .25 in to .66 in outside diameter.
How do you secure the wires in the screw terminals, and what mistake should be avoided?
Strip each conductor, insert fully into the terminal, and tighten the screw firmly; the common error is leaving insulation under the screw or under-torquing the connection.
When should the nylon housing or screw terminals be replaced?
Replace the device if the housing shows cracks, discoloration from heat, or if the screw terminals no longer grip 10 AWG wire securely.
More in Electrical Enclosures & Cabinets
Similar items
Bryant 5469NC Straight Blade Connector 6-20R 20A 250V 2P 3W
- Straight Blade Devi…
- 0.245 in to 0.655 in
HOFFMAN ASE6X6X6 Captive Screws Electrical Enclosure 6 in H 6 in D 6 in W
- Electrical Enclosur…
Hubbell Incorporated HBLFCAPO Single Pole Connector Cover Female Orange
- Wiring Devices





