Bryant 8300HBIL 20 A 125V AC Straight Blade Receptacle
A 20 A, 125V AC duplex receptacle with NEMA 5-20R configuration, impact-resistant nylon housing, and CSA, UL 498, and Federal Specification W-C-596 compliance
- Product typeWiring Devices
- 20 A / 125 V AC rating powers heavy-duty equipment
- NEMA 5-20R configuration ensures correct plug fit
- Impact-resistant nylon housing withstands jobsite abuse
- CSA C22.2, UL 498 and Federal Spec W-C-596 certified
- Single-gang flush mount simplifies standard box installation
Straight-blade 5-20R receptacle for 20 A circuits
The Bryant 8300HBIL is a 20 A, 125V AC duplex receptacle built to NEMA 5-20R configuration. It suits residential or light-commercial wiring where a grounded, polarised outlet is required on a single-gang flush mount.
Impact-resistant nylon housing holds up under
The ivory-coloured nylon body is rated impact resistant and meets CSA C22.2, UL 498, Federal Specification W-C-596 and NEMA WD-6. These certifications confirm the device withstands repeated insertion cycles and mechanical stress without cracking or degrading.
Flush-mount design simplifies rough-in
The single-gang, two-pole, three-wire layout fits standard boxes and accepts back or side wiring. No cover is included, so a matching wall plate must be sourced separately; the absence of GFCI means downstream protection must be provided elsewhere if code requires it.
How it compares
Measured against everything we stock in Electrical Enclosures & Cabinets, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 79% of the 1,411 comparable items (median $39.99).
Specifications
| Product | |
|---|---|
| Brand name | BRYANT |
| Product type | Wiring Devices |
Questions about this item
Does the nylon housing stay cool when the 20 A receptacle runs continuously?
The nylon housing is impact resistant and rated for 20 A at 125V AC, so it handles normal continuous loads without overheating.
What wiring must already be in place for this 5-20R duplex to install?
You need a single-phase 125V AC circuit with three wires — hot, neutral and ground — and a standard flush-mount box for the single-gang mount.
Will this CSA-certified 5-20R receptacle fit in the same flush box as older NEMA devices?
Yes, the single-gang flush mount follows NEMA WD-6 dimensions, so it fits standard boxes used by older NEMA receptacles.
More in Electrical Enclosures & Cabinets
Similar items
GREENCYCLE 1 Gang 2 Way Switch IP66 10A 125VAC 60Hz Grey
- Weatherproof Boxes
Hubbell Incorporated RACO 952 Electrical Box, 60 cu. in., 3 Gang
- Electrical Boxes &…
- Silver





