Bryant 9803W 15 A 120-277 V 3-Way Rocker Switch White
A 15 A rocker switch rated 120 to 277 V for three-way lighting control in commercial settings
- Controls lighting from two locations with 3-way rocker action
- Handles 15 A at 120–277 V AC for commercial circuits
- Back and side wiring speeds installation
- Stainless steel spring wire maintains contact force over time
- White finish suits standard commercial interiors
Bryant 9803W 15 A 120-277 V Switch
The Bryant 9803W is a commercial-grade 3-way rocker switch rated at 15 amps and 120 to 277 volts AC. It uses back and side wiring with a stainless steel spring wire mechanism for reliable contact. The white finish suits standard wall plates in offices, retail spaces and similar indoor environments.
Suited for maintained 3-way lighting control
Electricians and facility managers installing or replacing maintained-contact 3-way switches in commercial buildings will find this device matches the required 15 A rating and voltage range. It is not intended for momentary-contact applications, low-voltage control circuits, or installations that require an antimicrobial surface or a locking actuator.
15 A at 120 to 277 V AC rating
The 15-ampere, 120-to-277-volt AC rating is the single figure that determines whether this switch can handle the connected load. Verify the circuit amperage and voltage against this rating before installation to ensure code compliance and safe operation.
How it compares
Measured against everything we stock in Contactors, Relays & Motor Starters, at today’s prices. Recalculated every night.
- Price $8.99
- Cheaper than about 93% of the 1,098 comparable items (median $61.99).
Specifications
| Product | |
|---|---|
| Brand name | BRYANT |
Questions about this item
How long will the 15 A rating hold up when the 9803W runs continuously on a 277 V circuit?
The switch is rated 15 A at up to 277 V AC for maintained commercial use; sustained loads at the full rating are within its design limits.
Does the 9803W run warm or make noise when it carries 15 A all day?
As a passive rocker mechanism it generates no audible noise and only normal resistive heat at rated current.
What wiring must already be in the box for the 9803W to install correctly?
The device accepts back-wire and side-wire connections for standard 120–277 V AC branch circuits.
More in Contactors, Relays & Motor Starters
Similar items
TORK nsi DWZ200B Electronic Timer 365 Day SPDT 20A 120-277VAC
- IEC Delay Timers





