Bryant BRY5369NC Straight Blade Connector 5-20R 20A 125V AC 2 Pole 3 Wire
Industrial straight-blade connector rated 20 A, 125 V AC with screw terminals for 10 AWG cable from 0.25 to 0.66 in diameter
- Product typeStraight Blade Devices
- Size or dimensions0.245 in to 0.655 in
- Rated for 20 A at 125 V AC industrial loads
- NEMA 5-20R configuration accepts standard 2-pole 3-wire plugs
- Screw terminals secure up to 10 AWG conductors
- Nylon housing resists chemicals and impact in commercial settings
- Accepts cable diameters from .25 in to .66 in
Straight Blade Connector 5-20R 20 A
This Bryant straight blade connector handles 20 A at 125 V AC. It uses a 5-20R NEMA configuration with two poles and three wires. The nylon housing provides chemical and impact resistance. Screw terminals accept up to 10 AWG conductors.
Industrial grade for commercial wiring
Suited for electricians and maintenance teams needing a grounded, single-phase connector in industrial or commercial settings. The cable range spans 0.25 in to 0.66 in diameter. Not intended for installations that require an IP-rated enclosure or a different NEMA pin layout.
Cable diameter range 0.25 in to 0.66 in
The connector accommodates cables from 0.25 in minimum to 0.66 in maximum diameter. Verify your cable outer dimension falls within this window before purchase. The screw-terminal wire size limit is 10 AWG maximum.
How it compares
Measured against everything we stock in Electrical Enclosures & Cabinets, at today’s prices. Recalculated every night.
- Price $18.99
- Cheaper than about 70% of the 1,411 comparable items (median $39.99).
Specifications
| Product | |
|---|---|
| Brand name | BRYANT |
| Product type | Straight Blade Devices |
| Size & build | |
| Size or dimensions | 0.245 in to 0.655 in |
Questions about this item
Does the Bryant BRY5369NC generate noticeable heat when carrying a continuous 20 A load?
The connector uses screw terminals rated for 10 AWG conductors, which keeps resistance low so heat rise stays minimal during full-load operation.
What cable diameter range must I already have for the Bryant BRY5369NC to clamp securely?
The housing accepts cables from .25 in to .66 in outer diameter, covering the .245 in to .655 in spec range.
Will the Bryant BRY5369NC fit an existing 5-20R receptacle in my older panel?
Yes, it follows the standard NEMA 5-20R configuration with 2 poles and 3 wires, matching legacy 125V AC grounded outlets.
More in Electrical Enclosures & Cabinets
Similar items
Cheval Electronic Enclosure Co.,Ltd SA-SERIES 1.5U 65 x 178 x 203 mm Slate Grey electrical box
- Square
- Electrical Boxes
Eaton DG030GB Ground Lug Kit 30A 60A 100A 240V AC
- Industrial Electric…
Bryant BRY8269NC straight blade connector 5-15R 15 A 125V AC 2 pole 3 wire hospital grade
- Straight Blade Devi…
- 0.245 in to 0.655 in





