We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three bronze flanged sleeve bearings with 5/8 inch bore

Bunting Bearings

Bunting Bearings EF101416 flanged sleeve bearing 5/8 in bore pack of 3

SKU CH-3ACQ-SHEPA

Pack of three flanged sleeve bearings with 5/8 in bore, sintered bronze construction and SAE 30 oil self-lubrication for 10 to 220 °F operation

  • Flanged design simplifies axial location in housings
  • Sintered bronze construction provides self-lubricating operation with SAE 30 oil
  • Temperature range from 10 to 220 degrees F suits varied environments
  • Pack of three bearings reduces reorder frequency for maintenance
  • Precision length tolerance of +/- .005 in ensures consistent fit

Flanged sleeve bearing for precise fits

The Bunting Bearings EF101416 is a bronze flanged sleeve bearing with a 5/8 in bore and 7/8 in outside diameter. It is sold as a pack of three for maintenance or assembly work that requires multiple identical bushings. The sintered bronze body is self-lubricating with SAE 30 oil and carries a California Proposition 65 warning for cancer and reproductive harm.

Self-lubricating bronze frees external oil lines

The bearing operates from 10 to 220 degrees F without added lubrication, so the surrounding design does not need a separate oiling system. Its 1.125 in flange diameter and .125 in flange thickness locate the bearing axially while the 1 in overall length with a .005 in tolerance supports consistent alignment in the housing.

Sintered material handles steady heat and vacuum

Under sustained load the self-lubricating bronze maintains its film at temperatures up to 220 degrees F and remains functional in vacuum environments. The metallic material group resists wear during continuous rotation without the performance drop that can occur when grease breaks down or migrates away.

How it compares

Measured against everything we stock in Bearings, Belts & Drive Components, at today’s prices. Recalculated every night.

Price $7.99
Cheaper than about 91% of the 693 comparable items (median $35.99).

Specifications

No published specifications for this item yet.

Questions about this item

What temperature limit does the 220°F maximum reach under sustained use?

The sintered bronze bearing is rated for a maximum operating temperature of 220°F, so sustained loads must stay below that threshold to avoid material degradation.

How much heat and noise does the self-lubricating SAE 30 oil design produce during all-day operation?

The self-lubricating bronze sleeve runs without external grease, generating minimal friction noise and steady heat that stays within the 10°F to 220°F operating range.

What shaft size must I already have for the 5/8 in bore to fit correctly?

The bearing requires a 5/8 inch diameter shaft; its bore tolerance is held to ±0.005 in so the shaft must match that nominal size for proper clearance.

More in Bearings, Belts & Drive Components

Similar items