We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper terminal with hex head, single hole, 1.88 inch length

Burndy

Burndy Terminal 14 AWG 1.88In Copper 600V

SKU CH-M062-PFHNH

Copper terminal for 14 to 8 AWG stranded wire, 3/8 in stud, 600 V rating

  • Overall length2
  • Product typeCommercial
  • Copper body handles 600 V for reliable power transfer
  • Hex head design allows secure fastening with standard tools
  • Rated to 194 °F for demanding thermal environments
  • Fits 14 to 8 AWG stranded copper for versatile wiring
  • Single-hole 0.44 in stud mount simplifies installation

Terminal for 14 AWG Copper

The Burndy terminal accepts stranded copper conductors from 14 AWG up to 8 AWG. It is built for commercial electrical work where a single-hole, hex-head lug rated to 600 V is required. The copper body and 1.88-inch length suit panel and enclosure wiring.

3/8-inch stud with 0.44-inch hole

The lug mounts on a 3/8-inch stud through a single hole measuring 0.44 inch in diameter. Tongue width is 1 inch and tongue thickness is 0.19 inch. No hole spacing applies because only one termination is provided.

Rated to 194 °F and 600 V

The connector operates continuously up to 194 degrees Fahrenheit at its full 600-volt rating. It handles one conductor and one termination, so installers needing multi-hole or multi-conductor lugs must select a different part.

How it compares

Measured against everything we stock in Wire, Cable & Wiring Supplies, at today’s prices. Recalculated every night.

Price $27.99
Typical for this category: the median of 1,610 items is $25.99.

Specifications

Product
Brand nameBurndy
Product typeCommercial

Questions about this item

What does the 600 V rating mean when this terminal is installed in a circuit?

The 600 V rating is the maximum voltage the terminal can safely carry when properly crimped to a 14–8 AWG copper conductor and secured with a 3/8 in stud.

How does the 3/8 in stud size limit the connections I can make?

The single 0.44 in hole only accepts a 3/8 in bolt or stud, so the terminal can only be mounted on hardware with that exact thread diameter.

What clearance do I need to fit the 1.88 in long body and 1 in wide tongue?

Allow at least 1.88 in of straight run for the barrel and 1 in of width for the tongue, plus space for the hex head and 0.19 in tongue thickness when torqued down.

More in Wire, Cable & Wiring Supplies

Similar items