We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bare copper compression lug, one-hole ring terminal, tin-plated barrel

Burndy

Burndy YAD1CM16E58 1 AWG Copper Compression Lug

SKU CH-06Y1-PNQAZ

A 1 AWG copper compression lug with a 1.1 in tongue width, 0.63 in barrel length and 0.57 in barrel OD, rated 600 V and 302 °F

  • Product typeElectrical Connectors
  • Overall length2.3
  • Main materialCopper
  • Copper construction ensures high conductivity for 600 V circuits
  • Tin-plated contact resists corrosion in harsh environments
  • Brazed barrel provides mechanical strength under vibration
  • Single-hole design simplifies mounting on 1 AWG conductors
  • UL 467 listed for grounding and bonding applications

Burndy 1 AWG Copper Lug

The Burndy YAD1CM16E58 is a one-hole compression lug made from electrolytic copper with a tin finish. It accepts a single 1 AWG conductor and is rated for 600 V at temperatures up to 302 °F. The brazed barrel measures 0.63 in long with a 0.57 in outside diameter. UL 467 listed for grounding and bonding applications.

Who should use this connector

Electricians and panel builders terminating 1 AWG copper wire in grounded systems will find this lug fits the spec. It is not suited for installations requiring insulated barrels, multi-hole mounting, or wire gauges larger or smaller than 1 AWG. Buyers needing a different stud size or barrel length should look at other listings.

Check before ordering

Verify that your crimp tool and die set match the long brazed barrel dimensions shown. Confirm the 1.1 in tongue width clears the mounting surface and that the single-hole pattern matches the busbar or terminal block. Ensure the 600 V rating and 302 °F temperature limit satisfy the circuit requirements.

How it compares

Measured against everything we stock in Wire, Cable & Wiring Supplies, at today’s prices. Recalculated every night.

Price $5.99
Cheaper than about 87% of the 1,610 comparable items (median $25.99).

Specifications

Product
Brand nameBURNDY
Product typeElectrical Connectors
Size & build
Main materialCopper

Questions about this item

What crimp tool and die size are needed for the 1 AWG barrel on this lug?

Use a hydraulic crimper with a die that matches the 0.57 in barrel outside diameter and 0.63 in barrel length for a proper 1 AWG compression.

Can this tin-plated copper lug connect to an existing aluminium bus bar?

Apply an antioxidant joint compound between the tin-plated copper tongue and the aluminium bar to prevent galvanic corrosion.

How do I verify the crimp meets the 600 V UL 467 rating after installation?

Inspect for a uniform, flash-free crimp, then perform a pull test to confirm the 1 AWG conductor is held securely within the brazed barrel.

More in Wire, Cable & Wiring Supplies

Similar items