We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent inline fuse holder with two wire leads and crimp connectors

Buyers Products Company

Buyers Products Company 5601010 Fuse Holder 5 to 10A 12V DC 2 Poles Transparent

SKU CH-7VT8-JMWTV

An inline fuse holder accepting 5 to 10 A automotive fuses at 12 V DC with two poles and 14 AWG wire leads

  • Product typeFuses & Accessories
  • Product colorTransparent
  • Handles up to 10 A for reliable circuit protection
  • Rated at 12 V DC for automotive electrical systems
  • Two-pole design secures both power and ground paths
  • Transparent body allows instant visual fuse inspection
  • 14 AWG wire leads with crimp connectors simplify installation

Inline Fuse Holder 5–10 A 12 V DC

The Buyers Products 5601010 is an inline fuse holder rated for 5 to 10 A at 12 V DC. It accepts automotive blade fuses sized 3/4 in by 3/4 in by 13/64 in and compatible with series 257, AF, ATC and Mini Dual Fuse Tap types. The transparent plastic body measures .77 in long, .72 in high and .2 in wide. Two poles are provided for circuit protection in low-voltage DC wiring.

Simple crimp-wire installation

Two 14 AWG wire leads extend 2 in from the body and terminate in crimp connectors for quick splicing. The open block design is non-indicating and non-rejection, so no status light or keyed insertion is present. Installation consists of crimping the leads into the circuit and inserting a suitable fuse. Mis-crimped terminals or an incorrect fuse series are the typical points of failure.

Protects accessory circuits up to 10 A

The holder comfortably handles lighting, radio or accessory loads up to its 10 A limit on 12 V systems. It runs out of headroom when continuous current approaches the fuse rating or when a higher-amperage circuit demands a larger holder. Not suited for buyers who need panel-mount or indicating fuse blocks.

How it compares

Measured against everything we stock in AV Accessories & Components, at today’s prices. Recalculated every night.

Price $8.99
Cheaper than about 88% of the 3,838 comparable items (median $41.99).

Specifications

Product
Brand nameBUYERS PRODUCTS
Product typeFuses & Accessories
Product colorTransparent

Questions about this item

How can I confirm the inline fuse holder is functioning correctly after installation?

Check that the transparent body shows the fuse element intact and measure continuity across the 14 AWG wire leads with a multimeter.

What components are included with the 5601010 fuse holder and what must I purchase separately?

The holder with crimp connectors and two-inch wire leads is supplied; compatible ATC, AF, 257 or Mini Dual Fuse Tap fuses in the 5 to 10 A range must be bought separately.

Which fuse series and amperage should I select for this two-pole 12V DC holder?

Use 257, AF, ATC or Mini Dual Fuse Tap series fuses rated between 5 and 10 amps that match the 3/4 by 3/4 by 13/64 inch fuse size.

More in AV Accessories & Components

Similar items