CAFELE 6015-12 12V 0.1A 60mm case fan
A 12 V, 0.1 A case fan measuring 60 mm by 15 mm with a three-wire connection
- Product typeCase Fan
- Low power draw at 0.1 A from a 12 V supply
- Compact 60 mm frame fits tight chassis spaces
- Three-wire connector enables speed monitoring
- 15 mm thickness suits standard 6015 mounting holes
- Ready to install straight from the box
Compact 60 mm case fan
The CAFELE 6015-12 is a 60 mm square frame fan designed for tight chassis locations where a larger rotor cannot fit. It runs on a standard 12 V supply and draws 0.1 A through a three-wire connection, making it suitable for motherboard headers or fan controllers that provide speed reporting.
Steady airflow in confined spaces
At the rated 12 V the motor maintains a constant 0.1 A draw, so rotational speed remains stable during extended operation rather than spiking only at start-up. The slim 15 mm thickness allows installation between closely spaced components where heat can accumulate over long sessions.
Three-wire speed monitoring limit
The three-wire interface supplies a tachometer signal but does not accept PWM duty-cycle commands, so the fan runs at full voltage whenever the header is powered. Builders who need variable speed tied to temperature curves must use voltage-based control or an external controller instead.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $28.99
- Pricier than about 72% of the 8,339 comparable items (median $19.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | Case Fan |
Questions about this item
How much noise and heat does the 12 V 0.1 A motor produce when running all day?
The 12 V 0.1 A motor draws very little power, so it adds minimal heat to the chassis and runs quietly during continuous operation.
What connector must my motherboard or fan controller already have for the 3-wire lead?
A standard three-pin fan header is required to power the 3-wire connector and read its speed signal.
Will the 60 mm 15 mm thick frame line up with the screw holes on my older 60 mm mount?
The 60 mm square frame with 15 mm depth matches the common 60 mm mounting pattern used on older cases and heatsinks.
More in PC Cooling Fans
Similar items
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
Noctua NF-F12 iPPC-2000 IP67 120mm 2000 RPM case fan
- 120 × 120 × 25 mm
- 1 Fan
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan





