CAFELE AD0812XB-A73GL 80×80×25mm 12V 0.55A 3-wire case fan
12 V, 0.55 A, 80 × 80 × 25 mm case fan with three-wire speed reporting
- Product typeCase Fan
- Compact 80×80×25mm frame fits tight chassis spaces
- 12V 0.55A draw keeps power use low
- 3-wire connector enables speed monitoring
- ADDA 8025 design built for reliable airflow
- Original replacement part restores cooling performance
80×80×25mm 12V chassis fan
The CAFELE AD0812XB-A73GL is an 80×80×25mm case fan designed for chassis airflow. It runs on 12V and draws 0.55A through a standard three-wire connection. The ADDA 8025 frame fits typical 80mm mounting points in desktop enclosures.
Three-wire 12V 0.55A power interface
The single specification that decides fit is the three-wire 12V 0.55A power interface. Your motherboard or fan controller must supply 12V and accept a three-pin connector with a 0.55A current draw. Mismatched voltage or pin count will prevent the fan from operating.
Continuous 12V 0.55A operation
Under sustained load the fan maintains its rated 12V 0.55A draw without exceeding the specified current. The three-wire connection reports speed to the system while delivering steady power. Thermal performance remains consistent as long as the supply voltage stays at 12V.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $25.99
- Pricier than about 65% of the 8,339 comparable items (median $19.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | Case Fan |
Questions about this item
What does the 0.55 A current draw mean for my fan header?
At 12 V the fan pulls 0.55 A, so a standard 3-pin motherboard header rated for 1 A will run it with headroom.
How does the 3-wire connection affect speed control?
The three wires provide power, ground and a tachometer signal; the motherboard can monitor RPM but cannot vary voltage for PWM control.
Will the 80×80×25 mm frame fit my case fan slot?
The housing is 80 mm square and 25 mm thick, matching the 8025 mounting pattern used in most 80 mm case openings.
More in PC Cooling Fans
Similar items
Noctua NF-A14 iPPC-3000 PWM 140mm case fan 3000 RPM
- 1 Fan
- No Controller
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
1ST PC CORP. FFB1212EH-PWM 120mm 25mm 4000 RPM 150.33 CFM 56.4 dBA 4-pin PWM case fan
- 25 mm
- 2 Ball
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan
Noctua NF-S12B redux-1200 PWM 120mm 1200 RPM 4-pin case fan
- 120 × 120 × 25 mm
- 1 Fan





