CAFELE NFB10512HF 105mm 12V 0.39A 3-wire case fan
A 105 mm 12 V case fan drawing 0.39 A with a three-wire connection for speed monitoring
- Product typeCase Fan
- 105 mm square frame fits tight projector housings
- 12 V 0.39 A draw keeps power load low
- Three-wire connector enables speed monitoring
- 32 mm depth suits slim chassis layouts
- Original Delta part replaces worn OEM units
Compact 105 mm case fan for tight builds
The CAFELE NFB10512HF is a 105 mm square frame fan designed for chassis or projector cooling where space is limited. It runs on 12 V and draws 0.39 A through a three-wire connection. The slim 32 mm thickness helps it fit in narrow brackets or small-form-factor enclosures.
Steady airflow at fixed 12 V supply
Operating directly from a 12 V rail, the fan maintains constant speed without PWM regulation. The 0.39 A current draw stays stable during continuous operation, so acoustic output and airflow remain predictable over long sessions. Builders who need variable speed control should note the three-wire design lacks a PWM pin.
Delta-built frame with three-wire simplicity
The Delta-manufactured assembly uses a 10532 form factor that aligns with standard 105 mm mounting holes. Three wires provide power, ground and tachometer feedback for BIOS monitoring. No extra adapters or controllers are required; the fan plugs straight into a conventional motherboard or fan-header socket.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $33.99
- Pricier than about 81% of the 8,339 comparable items (median $19.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | Case Fan |
Questions about this item
How much heat does the 12 V 0.39 A motor add to the case when it runs all day?
At 12 V and 0.39 A the fan converts electrical power into airflow; the same energy ultimately becomes heat inside the enclosure during continuous operation.
What connector must my motherboard or controller provide for the 3-wire lead?
The fan uses a standard 3-wire header supplying 12 V, ground and a tachometer signal; a matching 3-pin or 4-pin PWM header will power it.
Will the 105 mm × 32 mm frame line up with the mounting holes on my older 105 mm chassis openings?
The 105×105×32 mm dimensions match the common 105 mm square pattern, so it fits legacy cases and projector housings drilled for that spacing.
More in PC Cooling Fans
Similar items
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan





