We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Cameron Sino 1500mAh 14.4V NiZn replacement battery

SKU CH-VCD2-MJP4V

Nickel-zinc 14.4 V 1500 mAh pack replaces original cells in compatible power tools

  • Battery pack size114 × 80 × 108.2
  • Battery typeNickel zinc
  • Battery capacity1,500 mAh
  • Battery voltage rating14.4 V
  • Details114 × 80 × 108.2
  • Product typeNickel zinc
  • 1500 mAh nickel-zinc chemistry delivers extended runtime for compatible tools
  • 4 V output matches original specifications for direct replacement
  • Fits DW984, DW985, DW991K-2, DW992K-2, DW994KQ, DW996K-2, DW996KQ models
  • New fully decoded chip works like the original battery
  • ISO 9001 certified production with overcharge, over-discharge and short-circuit protection

Compatible Replacement Battery

This Cameron Sino nickel-zinc pack replaces original batteries in numerous DeWalt power-tool models including the DC528 flashlight and DW984, DW985, DW991K-2, DW992K-2, DW994KQ, DW996K-2 and DW996KQ units. It delivers 1500mAh at 14.4V and matches the original dimensions of 114.00 x 80.00 x 108.20mm. Builders needing a direct swap for the listed part numbers will find it fits the same battery bay.

Straightforward Installation

The pack uses the same connector layout as the original equipment so it slots into the tool without adapters or soldering. A fully decoded chip communicates with the tool’s electronics exactly like the factory cell. Users should verify the model and part number before fitting and allow two to three full charge cycles for the battery to reach rated capacity.

Nickel-Zinc Chemistry Limits

Nickel-zinc cells operate at a higher nominal voltage than nickel-cadmium or nickel-metal-hydride packs, so they must only be used in tools designed for 14.4V NiZn chemistry. The integrated protection circuit guards against overcharge, over-discharge, over-voltage and short circuits but cannot compensate for an incompatible charger. Storage above 60°C (140°F) or exposure to fire and water will cause permanent damage.

How it compares

Measured against everything we stock in Household Batteries & Chargers, at today’s prices. Recalculated every night.

Price $45.99
Pricier than about 90% of the 10,440 comparable items (median $10.99).

Specifications

Product
Brand nameCameron Sino
Model nameDC528 Flashlight, DC551KA, DC612KA, DC613KA, DC614KA, DC615KA, DC728KA, DC731KA, DC735KA, DC735 KB, DC757KA, DC757 KB, DC830 KB, DC835 KB, DC920KA, DC925, DC925KA, DC925 KB, DC925 VA, DC930KA, DC935KA, DC935 KB, DC936KA, DC983KA, DC983SA, DC984KA, DC984 KB, DC984 VA, DC985KA, DC985 VA, DC988, DC988KA, DC988 KB, DC988 VA, DW054K-2, DW055K-2, DW906, DW908 Flashlight), DW918, DW928K, DW931K, DW935, DW937K, DW941K, DW966K, DW983K, DW984, DW985, DW991K-2, DW992K-2, DW994KQ, DW996K-2, DW996KQ, DW999KQ
Part number152250-27, 397745-01, DC9071, DC9091, DC9096, DC9099, DE9037, DE9038, DE9039, DE9071, DE9074, DE9075, DE9091, DE9092, DE9094, DE9095, DE9096, DE9501, DE9502, DE9503, DW9071, DW9072, DW9091, DW9094, DW9095, DW9096, DW9098, DWCB14
Product typeNickel zinc
Power
Battery typeNickel zinc
Battery capacity1,500 mAh
Battery voltage rating14.4 V
In the box
Battery pack size114 × 80 × 108.2

Questions about this item

How do I confirm the 14.4V NiZn battery is working correctly after installing it in my DW984 power tool?

Insert the battery, ensure the connector clicks fully into place, then run the tool through two or three full charge and discharge cycles; the pack should deliver its rated 1500mAh capacity and hold voltage under load.

What comes in the box and is a charger included?

The package contains one 1500mAh 14.4V nickel-zinc replacement battery with integrated protection circuit and shock-absorbing foam; a compatible charger is not included and must be sourced separately.

Which part number should I match — 9091, 9094 or 9502 — for my DW996K-2 drill?

Cross-reference the original battery label; this pack replaces part numbers DE9091, DW9091, DE9094, DW9094 and DE9502, so any of those printed on your old cell confirms compatibility.

More in Household Batteries & Chargers

Similar items