We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Cameron Sino Battery for Eppendorf 4860 Research Pro 1200mAh 2.4V

SKU CH-VRVC-5B6QX

Replacement battery for Eppendorf Research Pro 4860 electronic pipettes, 1200 mAh at 2.4 V

  • Battery pack size47 × 28.3 × 15
  • Battery capacity1,200 mAh
  • Battery voltage rating2.4 V
  • Details47 × 28.3 × 15
  • Reliable power for Eppendorf 4860 Research Pro pipettes
  • 1200mAh capacity supports extended laboratory sessions
  • 4V output matches original equipment specifications
  • Compact 47.00 x 28.30 x 15.00mm form fits battery compartment
  • Built-in protection guards against overcharge and short circuits

Compatible Replacement for Eppendorf 4860

This replacement battery fits the Eppendorf 4860 Research Pro electronic pipette, covering both single-channel and multichannel models. It supplies 2.4 volts and 1200 milliamp-hours of capacity, matching the original specifications. Laboratories needing a direct substitute for part numbers such as 4860 000.011 through 4860 000.348 can use this unit. It is not for users whose pipette requires a different voltage or form factor.

Straightforward Installation With Basic Precautions

Many installation videos are available online, making the swap simple for most technicians. The pack includes shock-absorbing foam for transit protection. The main risk is an improperly seated connector, which prevents the device from recognising the new cell. A fresh battery reaches full performance after two or three complete charge and discharge cycles. Avoid low-quality chargers, as they can shorten service life.

Verify Model And Part Number Before Ordering

Confirm that your instrument is the Eppendorf 4860 Research Pro and cross-reference the original battery part number against the supported list, which includes codes like 501.002 and the 4860 000 series. Check that the physical dimensions of 47.00 by 28.30 by 15.00 millimetres match the compartment. Ensure the existing charger is of adequate quality to maintain the new cell. This product does not suit other pipette models or voltage requirements.

How it compares

Measured against everything we stock in Household Batteries & Chargers, at today’s prices. Recalculated every night.

Price $15.99
Pricier than about 70% of the 10,440 comparable items (median $10.99).

Specifications

Product
Brand nameCS Cameron Sino
Model nameEppendorf Research Pro 4860 Research Pro Electronic Pipette. Single and Multichannel instruments
Part numberEppendorf 4860 501.002 501.002-02 501.002-05 4860501.002-05 4860 000.011 4860 000.02 4860 000.038 4860 000.046 4860 000.054 4860 000.062 4860 000.07 4860 000.089
Power
Battery capacity1,200 mAh
Battery voltage rating2.4 V
In the box
Battery pack size47 × 28.3 × 15

Questions about this item

How can I confirm the 1200 mAh 2.4 V battery is working correctly after installing it in my Eppendorf Research Pro 4860?

After fitting the pack, run two or three full charge and discharge cycles; the pipette should then hold its rated runtime and the battery indicator will track capacity normally.

What comes in the box and is any extra hardware required for the 47.00 x 28.30 x 15.00 mm pack?

The package contains the Cameron Sino battery with its built-in protection circuit and shock-absorbing foam; no separate connector, cable or charger is needed.

My original part number is 4860 000.038 — does this 1200 mAh version replace it directly?

Yes, the battery matches every listed Eppendorf part number including 4860 000.038, 000.046, 000.054 and the 501.002 series, so the 1200 mAh 2.4 V pack is the correct single choice.

More in Household Batteries & Chargers

Similar items