We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion camera battery, dark casing, connector on one end

Cameron Sino Battery for FLIR i3 i5 i7 IRC40 2200mAh 8.14Wh

SKU CH-10VH-FRN96

Replacement lithium-ion battery delivers 2200 mAh and 8.14 Wh for FLIR i3, i5, i7 and IRC40 thermal cameras

  • Total capacity2,200 mAh
  • Pack contents68.5 × 18.5 × 16.5
  • Battery chemistryLithium ion
  • Product typeLithium ion
  • Compatible withRadio
  • Extended shooting time with 2200 mAh / 8.14 Wh capacity
  • Reliable power from 3.7 V lithium-ion chemistry
  • Fits FLIR i3, i5, i7 and IRC40 thermal cameras
  • Compact 68.50 x 18.50 x 16.50 mm size for easy carry
  • Built-in protection against overcharge, over-discharge and short circuit

Compatible Thermal Camera Battery

This Cameron Sino lithium-ion battery replaces the original power pack for FLIR i3, i5, i7 and IRC40 thermal cameras. It matches the factory specifications with a 2200mAh capacity and 8.14Wh energy rating at 3.7 volts. Technicians and inspectors who rely on these imagers for daily surveys can carry a spare to avoid downtime in the field.

Simple Swap-In Installation

The pack slides into the camera's battery compartment and connects with the original connector; no soldering or adapter is required. A fully decoded chip communicates with the camera firmware so the fuel gauge reads correctly from the first charge. The most common issue is a loose connector seat — press firmly until you feel the click, then verify the charge indicator lights.

Check Model And Part Numbers First

Confirm that your device is listed as FLIR i3, i5, i7 or IRC40 and that the original battery carries part number 1950986, T197410, T198470ACC or T199376ACC. The replacement measures 68.50 by 18.50 by 16.50 millimetres and weighs 46.9 grams, so the battery door must close without forcing. Charge only with the camera's approved charger to protect the built-in over-voltage and short-circuit safeguards.

How it compares

Measured against everything we stock in Camera Batteries, Grips & Chargers, at today’s prices. Recalculated every night.

Price $12.99
Cheaper than about 70% of the 5,900 comparable items (median $17.99).

Specifications

Product
Brand nameCameron Sino
Model nameFlir i7, i5 Infrared Camera
Part number1950986, T197410
Total capacity2,200 mAh
Product typeLithium ion
Power
Battery chemistryLithium ion
Compatibility
Compatible withRadio
In the box
Pack contents68.5 × 18.5 × 16.5

Questions about this item

How can I confirm the Cameron Sino battery is working correctly after installing it in my FLIR i7?

After installation the thermal camera should power on and run for a typical session; a new pack reaches full capacity after two or three complete charge and discharge cycles.

What comes in the box with the Cameron Sino battery and what must I supply separately?

The package contains one lithium-ion battery with shock-absorbing foam; you will need to use your existing FLIR charger or a compatible 3.7 V charging source.

Which part number should I match to choose the right version for my FLIR i5?

Verify that your original battery carries part number 1950986 or T197410; this pack replaces both and fits the i3, i5, i7 and IRC40 models.

More in Camera Batteries, Grips & Chargers

Similar items